Search results

I am headed to Miami (sunny isles) in a few weeks. Is there a good bar/restaurant where you can watch the boats go by? We went last year but I couldn't really find anything close to us.

How long would you go before you pull a Bravo 3 outdrive and have it serviced? I am at 150 hours right now since it was last pulled.

Why does my cap need replaced each year? It's stored indoors and I always take the plug out each weekend. But every spring it starts missing and this is the culprit.

I used buff magic this weekend on my black hull. All I can say is wow! This stuff works amazingly well. It took out 90% of all the little micro scratches I had and made it look new again. Now to polish and wax.

I am wanting to do the whole compound, polish and wax this spring. I won't be able to get it entirely done in one day. The boat stays in a open ended car port. Lots of pollen this time of year. Can I wash it the next weekend and finish the job without any ill effects?

I just bought airline tickets. :(

I took some of your advice on here about replacing my bunks. I ended up scabbing 2"x10"x12' boards together. Glued, screwed and lagged together. I then had a bevel cut on top of the boards for the correct angle. Topped the boards with strips of PVC. This makes loading the boat so much easier!

Hey guys, had the boat loaded up Saturday with a bunch of people and it would not get up on plane. Probably getting to 3k rpm. Sunday just the wife and I went out and it would get up on plane and get up over 3500 rpm. But I could feel the prop slipping. Any suggestions? Coupler?

We have never used the toilet on our boat. Actually nobody else has either. Looking it over last weekend is looks like it's plumbed up and drains to the holding tank. I assume just turn on the water pump and pump some water to it and it should work. It's one of those toilets that are portable...

Anybody try this stuff? Wondering how well it works.

I am needing a sunbrella patch for my bimini. A mouse ate a hole in it this winter. Any recommendations?

I have a easy load trailer that has two large vertical bunks. They are 12' long. Any idea where I could get a new one? I can't seem to find one in any catalogs.

Anyone have a recommendation for some fiberglass repair in Louisville? I have a locker door that has some nicks and cracks in it.

Any info on why I keep getting a corroded distributor cap? About 50 hours and needs replaced again. Has a miss when forst running.

What kind of pump is everyone using? I need to buy one.

I would like to replace my from hatch door. It has been beat up by the previous owner. Any idea where I could find one? Thanks!

I have a 2007 350 mag MPI that misses out. It fluctuates RPM's 20-60. Idle on up to plane off. I had this problem last year and replaced the distributor cap and rotor. Problem was solved. Could I have the same problem again? Anything else to look for?

Our water that we use to spray off our feet when getting back on the boat, smells like rotten eggs. Have not had this smell before. I usually go through a tank every couple weeks. Any way to get get rid of the smell?

What plugs are recommended for this motor? I am wanting to change mine out this weekend. Thanks!

I am missing a few snaps on the hull for the snap on cover. Any idea what size they would be? Or how do I messure to make sure I get the right ones?