Search results

I have a 1987 sea ray 390 EC It has the standard black double rocker switch to control the tabs, along with the bennet auto tab controller (i will attach pics of both) My question is im in the process of remodeling the dashboard/helm area and i want to replace the trim tab double rocker switch...

Great! Thanks for the response i was thinkin the same thing, easier to buy the parts and do it myself

I have a 1987 390 ec and want to get everyones opinion on a couple different options ive seen on this site over the years. i have seen some guys go the fixed tab route and ive seen some guys add 2 additonal 12x12 trim tabs to the middle of the boat. i would like to do one of the two but would...

I checked all the connections, they all look good, loosened and re tightned them to be safe but no luck, same symptoms, red light is on during start and run and no activity from the unit itself

When you say red 8 pin connector, is that on the back of the three knob control panel or is it on top of the unit itself?

There is nothing happening with that unit, the orange light on the panel is lit up on start mode and run mode but the unit itself isnt making a single noise not even trying to turn on. No fan no compressor nothing! but the aft unit is working normally and my water flow through the two thru hulls...

I have a 1987 390 EC. Im having a issue with the forward air conditioning system. Last night while i was sleeping it basically stopped working. The breaker never tripped on the main panel but the fan is not blowing, the compressor is not running and the weird part that i hope will help...

If its not letting you through i would just make a new hole

I just snaked the wire through the silicone and it went fairly easy if u try ripping some of the silicone around the outside of the hole u will see the best spot to try to go through then just reseal with silicone if this doesnt work makng a new hole shouldnt be a problem just reseal it and u...

No signal loss via speaker wire i used 10ga wire though....... little bit of a PITA to snake the arch but not a big deal bus bars do NOT have enough power for a amp definitley need to run wires to the batteries silicone comes out easy enough just replace it with GE silicone I from home depot easy!

what gel coat color?

I have all four of my amps mounted in the cabinetry above and behind the couch in the salon. I have bazooka tubbies for my radar arch speakers, they each have a front and rear facing speakers so it projects the sound to the bow and to the swim platform. under the drivers seat is a clever idea...

Looks great!!

If u need lens covers i have a few extras from old fixtures that i replaced Get me a pic and i would gladly give them to u

I have a rouge wifi antenna i love it!!

Heres a few pics the alpine 6x9s have been replaced with jl audio m880s as have all the side panels and seats every speaker has a red led ring behind it bright and crystal clear loud!! I wanted to share an album on Photobucket with you! http://photobucket.com/albums/w475/skillz48047/boat...

I have a pioneer touchscreen double Din head unit 4 alpine 6x9s just for the cabin for night time the cockpit has 6- jl audio m880s 2 10" jl audio subs and bazooka 8" wake tower speakers on the arch which has a 8" rear facing speaker and a 6.5" forward facing speaker per unit and a cutom jl m770...

I love my faria gauges!

I have the auto tab controller on my boat already any idea if that makes the install easier or harder? Thx

Ive been eyeing those up let me know how the install goes thx -larry