Search results

Looking for assistance, changing out my risers and I see a line goes from riser to shaft as if I have a mechanical seal. I have packing glands and am wondering if I need to hook up the line from the riser to the shaft, for that matter why is the line even there. I could understand if it was a...

After troubleshooting the system I have found if I braek the seal of the vacuum switch the vacuum pump kicks on, telling me the pump is OK, now I notice an adjustment can be made with a turn knob for spring tension, should I adjust, if so which way? The previous owner installed a new switch in...

Thanks for the advice, sorry about multiple postings, 1st day. Some answers to some questions. The pump does not seem to be running. But did for 1st five days and shut off after creating vacuum and did not leak. The bowl is holding water The vacu flush system worked great for 5 days All...

Just purchased a 1988 300 Weekender and 5 days into purchase vacuum flush system does not create vacuum, any ideas or thoughts are appreciated

Just purchased a 1988 300 Weekender and 5 days into purchase vacuum flush system does not create vacuum, any ideas or thoughts are appreciated.:huh:

New to site, I newly acquired a 1988 300 Sea Ray Weekender and I have a question regarding electrical power on the boat. The generator has been removed, my question is when the turn knob is turned to shore power, and shore power is disconnected, does the bopat automatically go to battery power...