Search results

It looks like mine goes in a loop also. Thanks for the info

I have carburetored engines so the first thing I always do is push the button, so I don't engage the drives while starting the engines. So wasted a lot of my time and yours on this. Sorry! The drive was in neutral when I yanked it. Should I paint the mounting surfaces on the bell housing(I boat...

I removed the drive, because it was leaking gear lube. I had that cable replaced at the shop not that long ago. I've had an issue the a drive sticking in forward gear and it might ha very been this one

I abbreviated shift shaft. Not being to move the upper shift shaft is letting you know that the connections haven't come apart at the bell housing. I'm going to look at what you mentioned inside the boat. Thank you

I'm going to look for something wrong there. Throttles and drives are controlled by the same shifter

Hi all! I'm new at finding my way in a forum, and at servicing outdrives.i have a 92 with twin Gen 2's. I took the port c-r drive off with the shifter in forward position. I know now about the error of my ways. After I removed the drive I noticed the s.s. shoe was at an angle, and moving the...