Search results

  1. M

    Neutral Safety Switch/98 310 Sundancer

    I'm having a problem on Stbd engine. Finding neutral when starting engine is sometimes a problem. Move shifter back and forth and it will start.I think the switch is mounted on the top of the tranny. There are 2 senders next to each other. Not sure which one is Neutral switch, but I can figure...
  2. M

    Westerbeke Impeller Kit and Belt - Brand New

    Yes, waiting for check.$$$$$$$$$
  3. M

    Water pump, generator, and grey water tank

    Quick check for fresh water pump, cap the out put side and run pump. It should shut off. You can buy a new pump for around $150. The Jabsco is warranted for 3 years, just replaced mine under warranty. It would not shut off either. There are parts available to repair these pumps. Many online...
  4. M

    How do you get to the vacu flush pump?

    Did you check the seals at the toilet? My toilet ran when I bought it and I only had to replace the toilet seals. A much easier job.
  5. M

    Westerbeke Impeller Kit and Belt - Brand New

    I have for sale an Impeller Kit #32620 and a Pump Belt #47290, for a sea water pump on a 4.5 KW Model # BCGTC. Brand new. They may fit other Geni Models, check your part numbers. I replaced entire pump with the new style and had these for spare parts for the original pump. I believe the original...
  6. M

    4.5 Westerbeke Raw Water pump replacement.

    Yes, but you know how that works. I just wanted to know if anyone has done one.
  7. M

    Headliner removal for repair.

    That was my first thought also. I will probably try that first. Do you know how they come down?
  8. M

    4.5 Westerbeke Raw Water pump replacement.

    I need to replace my raw water pump on my Geni. The original is no longer available so I ordered the replacement kit. The kit comes with a new mounting bracket and everything else to change it over to the new style pump. Has anyone done this job yet?? Any pointers or spacial tools needed?? The...
  9. M

    Headliner removal for repair.

    My 1998 310 Sundancer has a seam coming unglued at the edge of the vinyl. It is the center panel in front of the head. Does anyone know how to remove the panels.:huh:
  10. M

    windlass spring

    Does anyone know where you can buy just the spring?
  11. M

    Manifold/riser poll

    Should risers be re-torqued every year? Mike
  12. M

    Things to do in Key West

    The Navy Lodge is on Sigsbee Island, not close enough to walk. We have stayed there. We stay at the Condo's, converted housing, near the Fly Navy building, on base, Trumbo point. MWR runs it. Mike
  13. M

    Official (1998-2002) 310 Sundancer Thread

    :thumbsup: I am thinking about upgrading my electronics in the spring. The original Raymarine Radar dome, I heard, could be upgraded to digital from Raymarine at a nominal charge and you can just replace the display with a new one. Has anyone done this? What is a nominal charge? I don't use the...
  14. M

    Things to do in Key West

    We go every year for 2 weeks. Leaving 2/18. Being retired military we stay at Trumbo Point, walking distance to down town. We love the old port area, off the beaten path. Lot's of small locals bars. 2 of my favorites are Dante's which has a pool bar, and Schooner Wharf. This is where the locals...
  15. M

    No Counter Offer

    Fix the heater and sell it.
  16. M

    Bilge Pump float switch

    Thanks, that's what I figured. Mike
  17. M

    Bilge Pump float switch

    During winter lay up I found my rear bilge pump float switch is not working. Pump works ok on manual. On my 98,310 Sundancer it is located under my geni. Does anyone know a way to get to it? It looks like the geni may have to come out or be moved forward to gain access.
Back
Top