Search results

So I measured the depth of the water this weekend on a stick, it was about 40-42" My Onboard gauge read 24" (actually it said' but I converted it to inches for this example) So that appears to mean that the transducer is mounted 18" below the water line. SeaRay's Documentation says the Draft is...

Thanks. That would work if I had a trailer and could pull the boat out. (Perhaps I can swing by the marina when they pull the boat out in October.). Is there any way to get this value (or at least get a value reasonably close) while the boat is still in the water? With the lake water getting...

Ok. I found documentation from Sea Ray that states the Draft is 36" with the drive down and 20" with the drive up. I understand that Draft is the distance between the waterline and the lowest point on the boat. But this brings up more questions.... Is the draft provided by Sea Ray based on an...

The lake we boat on is getting low due to drought conditions. I have never seen the underside of my boat (we keep it at a marina and they store it over the winter.) The depth gauge on the dash reads 2.5 feet when docked in my slip. I assume that this measurement is taken from the bottom of...

The elbow (?) that holds the 2 sections of poles together broke. PLUS we've had a hard time keeping the pole to stay secure in the socket since we got the boat, so I figured it would be a good time to replace everything. But to your point, I suppose we could piece something together if that was...

Our anchor/stern light pole broke over the winter and I'm trying to replace it. Unfortunately I have not been able to find one that is the same size. Our original pole is 84 inches long but none of my searches online comes up with anything close to that length. Does anyone have a resource for...