Search results

no problem with the cold water faucets and other hot water faucets.

My galley hot water hose is splitting between the threaded part and quick connect hose side when I use the dockside water inlet supply. I connected again it with some home made stuff like rubber and hose clamps and but it resists to the onboard water pump's pressure but again can't use it with...

I have bow and stern thrusters from factory. Bow thruster + genny + port engine + cabin 12 volt + cockpit fridge gets energy from port 2 batteries. Stern thruster + starboard engine + cockpit 12 volt gets power from starboard 3 batteries. There are 3 posts under the AC converter. But 2 of...

Hi Rory Wellcome aboard CSR. As others wrote 315 badged 280 in USA which represents 28' LWL and 31' LOA. I had 2005 315DA with VP KAD300-A coupled to DP-G drive. Feel free to ask antyhing about the 315 and engine/drive combo. Enjoy it was a great boat for me both economical, fast and too much...

The link is what I bought, juts choose the pin number. For the male plug which is fixed below dash/helm and comes from the black box, there are 10 pins and 2 of them are broke.The mail from China came to my winter home and I'm at my summer place and will see and try to replace it next week or...

I bought the 10 pin connector inthe below link for my NS100 and haven't dig into it how to swap them. https://tr.aliexpress.com/item/4000003233631.html?spm=a2g0s.9042311.0.0.10044c4dCks80A

Ok thanks, will try that.

Can you please give some detail ? How did dug the caulk by inserting there a razor and then put the sealant or lifted the glass fully etc ? TIA

This is the starboard skylight which is not leaking to show how it is seen. Then the port one which is leaking and I taped it so stopped leaking. And port from cabin.

Yet it is glued from outside.

Thanks again but I can't reach under the glass. Let me add a photo to show you better.

Hımm thanks, so how to squeeze the sealant without messing through the not seen tiny gap that allows rain water ?

I need to reseal one of the fixed round glass/windows on the deck, any tips how to remove the glass without damaging it and what kind of sealant is needed. TIA.

Not to hijack the thread but any help for the Northstar black box to handset cable that I need which has 2 broken pins and I can't solder them, so I insert metal pins into the handset cable end (female) then try to kiss the pins to broken points, but in choppy seas it is moving and I lose vhf...

I last bought them 2,5 years ago and they sold 20 in a box and each in cigar shaped plastic bottle with breathing cap. Maybe yours is the same and kept its humidity, but not sure for 20 years.

Yeah I realy like that royal corona, bought it from duty free shop in Beirut before the explosion.

My favorits. Except Guantanamera even it is Cuban all are hand rolled.

Wellcome.

I have both bow and stern thrusters and they are #80 something.

If it is factory fitted like mine it's "sidepower" which is also 2007.