Search results

I too was amazed at how well secured they are. I lightly caulked around the outside frame and then replaced the screens and gaskets. I'll let you know how it works. MJK

I purchased a Weber Q100 grill for my boat. It works great and I use it outside of boating as well. For a mount, I used a fish cutting table that fits in the rod holder with a piece of plastic screwed in the front to keep it stabilized. Storing it on a 250, well that's another story. MJK

I called Bomar and they were wonderful. I told them what boat I had and they said OK this is what you need. They new what Sea Ray was using in my model year. Give them a call they were very freindly. tel: (603) 826 5791 MJK

Check with Bomar if they are the manufacturer. I just ordered replacement screens from them for mine.

See below: MJK

Where did you find the boat you purchased, through a broker, or on some site? Did you come to the US to see it first? MJK

I painted my bottom(boat) at the beggining of the 2007 season with the recommended solution from Interlux. 1 - Lay down numerous coats of their Interprotect 2000E barrier coat (bottom never painted and clean when I purchased it) 2 - Lay down 1 coat of a very bright color of Micron Extra...

On another board I was asking about replacing them. I was told parts $650 installation 4 hours. I'll probably end up doing them myself this winter. 4 x $90 = $360 for labor. MJK

You could get an entire engine for 8k MJK

The Vacuum pump. MJK

Check out this one. Looks like an awesome deal...

I installed the new lock today as well as fixed the clasp on the undersink door in the bathroom. The lock I purchased from Flounder was a perfect fit. They even matched up the lock to the keys I already have, so I don't need to get any more made. Thank you everyone for your help with this! MJK

I am not sure about the law, but... I don't think this would apply if you felt endagered by his agression and then once on the boat, his attack. I may be wrong but if some guy is talking trash about me, and he is in need of assistance, I would not offer assistance. By inviting him abourd your...

Already ordered one from Flounder. They were extremely helpfull. thanks for all the help, MJK

Thank you, you saved me the hastle of trying to get it fixed. I'll buy one tomorrow. Thank you, MJK

Damn it! I never pushed the the other sie of the screw out. I removed it today. Is it possible to fix this one, or should I buy a new one? http://www.17purdyslane.com/pics/lock1.jpg http://www.17purdyslane.com/pics/lock2.jpg Thanks, MJK

I'll try and get a pic this weekend. I may try and fix/replace it over the winter. Thanks, MJK

Thanks for all the help. I tried that one screw, but it wouldn't budge. I guess all the goop to seal it in was holding tight. I looked up in the SeaRay parts guide and it appears to be a mobella 762872. I did some searching and found them on fpmarine for $59. I have to just verify it before I...

Congrats, that sounds like a steal to me. It's also nice to hear of a company in the marine industry that seems to care about the customer. Best of luck with the new ride, she looks awesome! MJK