Search results

  1. J

    fender basket placement.....

    I bought Helm SS steel baskets. 7 years old and look great. Not thick like Taylor.
  2. J

    Painting shafts and props with anti barnacle paint

    I use petit spray on barrier coat. Two coats. Shafts. Props. Rudders. No more barnacles for me :))))
  3. J

    Nantucket this weekend

    NHow you are thinking!!!!!!...refuse ALL invites as you choose mid may-mid sept......
  4. J

    marina bay k36.....r u ding aquapalooza 0n 7/19? Gate code 0333#.....Tom Smyth

    marina bay k36.....r u ding aquapalooza 0n 7/19? Gate code 0333#.....Tom Smyth
  5. J

    Which battery should i use with my kohler 5k gen?

    My 290 aj uses house/stb battery set to start,,,,2 isolator switches....3 batteries.....1 each engine...1 house...not the greatest but never had a problem....YET
  6. J

    Foul Smell in Water

    Does the water have a "vomit like odor"? west marine sells a 2 part cleansing/purification kit,,,works well..follw directions,,,,on fute fills .then use baking soda (1/2 box} next few fills to sweeten...ok to drink...gook luck
  7. J

    Who got screwed with a Northstar NS 100 VHF

    what a POS this microphone to base mounts!!!!!!!!!!!!broke a pin,,no longer made NS100 plus northstar old out to another company...welcome to screw club!!!! o
  8. J

    Northstar NS100 base plate

    My problem is similar to many who own this pos designed radio....pin snapped in black base connector....Northern sold...no replacement available...happened today......anyone know where I can buy a new or used base with wired radio connector,,,if not then any leads to new install and fix for...
  9. J

    Cannot discharge holding tank

    Timely post...same problem for me...will fix over winter
  10. J

    quick 12 volt windlass....wont raise anchor

    Alll the best i'll ck. it out :}}}}}}}}}}
  11. J

    quick 12 volt windlass....wont raise anchor

    last Friday all worked well...sat. 7/6...anchor down like a dream...ready eo leave.............click ...click...from helm....went fwd. to foot switch...same thing...hauled by hand....sucked big time///at dock proper voltage on relay box....manual push on footswitch while holding relay...
  12. J

    Anchor line not feeding

    Having same problem with my Quick/12 volt windlass...will buy and replace tensioner clip-spring first....30.00 part...
  13. J

    1st time buyer advise wanted - 04 260 sundancer...

    I bought a used 2004 260 in 2006 300hp/350 engine with 96 hours on meter...used it ,,,enjoyed it,,WIFE Hated Narrow beam and TOp Heavy.Action...now have 2007 290 AJ with all options and 130 hrs on motors..DONE!!!!!!!!!!!!!!!!!!!!!!and HAPPY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:}}}}}}}}}}}}}}}}}}}}}}}}}
  14. J

    Marina recommendations in MA

    Marina bay does NOT restrict yours/ or your vendors access to work on your boat...only requires they have insurances under ma. law and sirn in on entering property,,,The former Beach Club is closed and gone forever//lans presented to city for consideration show ........Luxury Apts. and...
  15. J

    Hi all, what do you think about this 05 260 for sale (95hrs)

    Ditto my 04 was Great..but any shift in weight underway=trim tabbi ng!
  16. J

    2008 290 Amberjack cruise RPM

    Sounds like a great buy!!!!!!!!!!!my 290/2007 3500-3600 rpm clean botom and drives props shafts 23 mph...4100 rpm 32 mph gps speed clean props/shafts/hull
  17. J

    Cleaning bronze wheels

    Thanks..both props were trued and prop scanned on delivery may 2011...put approx 35 hours on them..edges ar clean no nicks or spurs...dont want to pul them for nothing...if you know what i mean...
  18. J

    Boston Boat Show

    Dropped in mid afternoon friday 2/17 figureing on last 2 yrs in/out 1 hour...2 hours on parking meter...made it back with 3 min. 2 spare...finally a better show....Bring on Spring!!!!!!!!!!!!
  19. J

    Cleaning bronze wheels

    My v-drive props were not shiny on haul out....fouled and barnacles...i want to bring back to shine and clear coat anti- foul them....Suggestions welcome for DIY or do i need to pull and give to prop shop to brighten?? THANKS :huh:
  20. J

    Upgrading from a 260 Sundancer to 320

    Very happy for you....Best wishes throughout purchase and shakedown..post pics pls.!!!!!:smt038
Back
Top