I have an old dedicated transducer that I will remove, so I do have an existing hole
I was thinking about a DT800/810 not sure why they cost more than the DST version
1990 330 EC getting new electronics and a nmea 2000 network mfd(s) will be simrad either go9 or nss9 question is; use the transom mount transducer that is usually bundled in or use a thru hull looking for accurate depth, not really much of a fisherman
Thanks !!
assuming the deck is a balsa cored layup, does anyone know the thickness of the balsa?
boat is hours away and I am gathering materials to repair an area under the horns
Thanks !!!
SO I picked up an old used generator, it has the Nissan 988 (4) cyl
hasn't run in god knows how long, hour meter says 433
turns over decently but had no spark, new points and coil installed
I now have a healthy spark
Problem is I have no compression or vacuum
pulled the valve cover, valves move...
I made black laminate panels that cover a large portion of the vertical carpet at the setee
left a recess for LED lights behind it, photo below somewhat shows it
I have (1) floor hatch just outside of the head door, It's not quite finished and I don't have photos but
I covered the floor, trimmed to the opening with a router bit, covered my hatch doing the same
I have a 1/8 strip of stainless steel wrapping the edge of the hatch, plan is this will prevent...
My boat is on Lake Charlevoix (northern Michigan) I live in southern Michigan So it's in winter storage
I purchased it in July of this year, so it's fairly new to me. I will work on getting some pics put together of what I'm doing
so far I have gutted the cabin, faux wood floor replaced the...
Can an EC squeeze in here, not too many advantages to an EC over a Dancer, but a larger TV is one of them
this is a 1990 that I have gutted and in the process of refurbishing
Thanks, the arch lights on mine are wired into the indirect light switch, on the back of the switch a spade terminal had fallen off, put it back on and I had lights, I still haven't found a wiring diagram, the search continues
want to add a second shore power inlet to my 1990 310 da
would like to stay as close to stock as possible
looking for the secondary panel w/ meter, polarity and breaker
new to me old boat, been sitting for sometime.....
a few questions to get started
what lights should the indirect light switch turn on ?
where is a switch for the lights under the arch ?
where is or should be the shore water inlet ?
Thanks in advance for any help !!!