Search results

New seats or refurbished Does anyone know if it's possible to get new seats for the cockpit? I'm considering buying new instead of getting them refurished. I guess that the front seat is the hårdest to replace, since it has hinges that goes into the plint.

Hi guys Have anybody replaced the wiper motor? It is reachable from the head. If you remove the light in the roof, you can get the motor. But there is just not room enough to pull the motor out. Do you have any ideas how to remove it. I have a new similar motor I need to install Regards Thomas

It looks like a nice product you have chosen. I have seen similar, but not with the bracket in the middle. The one you attach to the sloping part of the bow. Did you made some kind of adjustment to the original product, or does it come as is? And finaly, do you have a link to the seller?

Sounds great. I'm considering installing a bow roller too. Do you have some pics of your installation? My primary concern is to fasten the anchor when it's on the boat. I don't like the idea that it is loose and bumping up and down.

CHOOSING THE RIGTH PROP Hi I just repowered my 220DA. Bougth a brand new Mercruiser 5.0 MPI with Alpha One gen. II. Now i'm wandering about the propeller. The gear ratio is 1:62. Does any of you guys have any suggestions? I know that I should choose a prop that gives me the right rpm, but...

Hi guys ! I'm visiting Las Vegas next week and I would like to do some marine shopping. Not for a new boat, but maybe som electronics and other accessories. Any recommendations ?

Collector21: Congratulations. It looks like a nice repower. I considered Michigan Motorz, but I couldn't find a mechanic who would install it. They will only do the job if they sell the engine aswell. To bad. I have repowered with a new Mercruiser 5.0 MPI, new transom and new sterndrive. The new...

Hi Isola Thanks for your reply. Year, N.Irl. and Denmark are not the warmest spots on earth, and a heater would be nice. If I find a heater that neads 24V, would it then be possible to use it in my 12V setup?

Du any of you have a heater in the boat? If so, what kind of heater. I would like to purchase one, and could use some inspiration. Maybe specific places to buy.

Hi guys ! This season everything has gone so wrong. Havent been boating since june 1th :-( My Mercruiser 5.0 is causing me troubles again - this time valves have been bend and 2 cylinders aren't working. Well, so I look for a new engine. Do any of you know this company...

But then you just have to send me yours :smt001

Hey Stewie85: You have the cockpit cover I'm in love with. Just browsed your photo album. Where did you get it?

When I look at your profiles I can't find any pictures. Is there no gallery of 220DA's? I think it would be nice and helpfull to have a lot of 220DA pictures to get inspiration from.

Do you know if templates for the cockpit cover are available? Just saw this Chapparral in the marina today, and I love the cockpit cover. I would like a similar one.

220 DA boat cover Hi, anyone who knows what this type of boat cover is called, and where to get it? http://chicagoheights.olx.com/1989-sea-ray-220-sundancer-with-used-trailer-iid-43093016

On my boat: There is an inlet/outlet between the small bilge fwd and the large bilge. The large bilge is one singe unit. It's not devided into two rooms. As far as I can see, there is absolutely no inlets from anywhere to the large bilge. And I can't find a drain hole in the last step either.

UK John and Isola: World class answers :smt038 I will investigate the shower bilge compartment to find out how and where the bilge pump could be mounted. As far as I remember, the flat area of the bottom is not very big. I suppose the bilge pump has to be mounted on a flat area.

No, you havent confused me at all. Your answer is pretty straight forward and clear to me. I have been in Berlin for a couple of days and havent been able to investigate further. I will for shure look after the drain holes you mention. From time to time I have had water down the steps to the...

Yeah - I get it. I only have one fitting where you have two. No problem to get access under the sink. There is a hatch, and there is access from the mid cabin aswell. 12v is no problem either. I think wires are supposed to go via the engine compartment where there is a fuse box for all bilge...

Thanks :thumbsup: I went through the manual yesterday and it says that not all 220s have a bilge pump in the shower sump compartment. Where does the water go from the pump? There must be an outtake somewhere.