Hi all. I bottom painted my boat 2 years ago. I am planning on a haul out to do some maintenance etc. The boatyard doing the haul out and maintenance said that after two years the antifoulng agent on the bottom paint is not good. The boat should be repainted. The boat is in a slip all year in...
Update on my Generator. Replaced the fuel filter on the unit. The generator ran better, but not good so I am assuming it has something to do with the fuel system? Next step Im going to replace the plugs. The generator I am assuming is the same age as the boat, 2004 with only 90 hours on the...
Thank you for all the help. I will try the recomendations you have provided. Yes there is water coming out of the exhaust system. I think I will start with the gas filter on the unit. Does anyone know when you take out the zinc anode will water always pour out? I checked the anode and it looks...
Yes, thats my generator, I did replace the screw on in line water separator, I did not change the second filter you are referencing. Is the second filter at the end of the copper flex line right in front of the Kohler name plate?
If so, do you have a filter part number? I also checked the Zinc...
Hi Boaters, still dealing with my Kohler Gen Issues. the model is a 5E, only has 90 hours on it. She will run for a total of about 5 minutes after about 3 minutes starts stalling and running rough. Does not generate enough wattage to run the microwave. I have changed the fuel filter, cleaned the...
Question, My Generator (with fresh water valve open) runs for about 2 minutes then shuts off.
Any advise? Water is coming out of the vent. I'm going to start with replacing the fuel filter.
Thank you,
Hotjambalaya
Hi anyone experience engine shutdown upon fisrt start? While getting ready for my last 2 voyages the engine turned off.
I run the fan for about 4 minutes then start my engine. After about 3-5 minutes the engine shut down. Gauges were all normal. I restart the engine and it ran great all day...
Hi all,
Any suggestions on where to find the issue with my trim gauge? It is fluctuating while in motion , however the trim is unit is working properly. The smart craft gauge is also acting kind of wonky when I increase the speed.
Thank you,
Mitch
Hi
My boat is equipped with a 2004 Raymarine chart plotter that requires a disc inserted in the side panel. I am told the discs are not available anymore. Is there a new Raymarine chart plotter that simply plugs into the wiring I currently have for a seamless switch to new technology?
Thank...
The Holding tank pump located on top worked like a charm! The only issue is my wife was not thrilled that I brought the contents into the house and dumped the proceeds down our toilet!!!!!! Pretty strong smell
Thanks for the information