Search results

  1. J

    1990 350 sundancer

    Hello I owned a 1988 300 weekender for about 10 years.sold it a couple years ago and currently in a 28 Albin. Looking to get back to searay Looked at a 1990 350 sundancer today with twin 7.4s rebuilt in 2015 with 200 hours on them Boat looks really clean,cabin dry,no stains on headliner,no soft...
  2. J

    3 bank charger for 30 weekender

    Hello,my old blue 3 bank charger has died.looks to be original to this 88 boat so got the moneys worth.whats everyone else replacing with?was looking the promariner 3 bank 20amp charger.my old charger says 40 amp.is that 40 amps for each bank or 40 banks total.just want to ensure I have enough...
  3. J

    thunderbolt 4 harness

    looking for a harness to the thunderbolt 4 ignition module for 1988 350 chevy.the harness goes from the distributor pickup to the coil and to the ignition module.I have the triangle module mounted to the riser.anyone have a junk motor or junk boat.harness not available through merc anymore...
  4. J

    Machine shop recommend in long island ny

    Hello.looking for a machine shop to do my 5.7 heads.have one bad valve but with the age want a complete rebuild.im in Amityville long island ny.any good recommendation?
  5. J

    Shaft collar

    started removing my shafts today so I can replace the stuufing box hoses.port side has a collar on the shaft,starboard didn't. I see them listed on the Buck Algonquin site but it does not say what they do? should I get new ones and put them on both shafts and how close to the hull do they go...
  6. J

    carb rebuider in long Island NY

    need to have one of my quadrajets rebuilt.at the end of last season noticed a fuel smell after shutting down,found the carb was leaking internally after shutting off.not sure if the floats a problem or needle/seat. anyway is there someone can recommend to me to have it rebuilt,want someone good...
  7. J

    Barnacle Buster adventure

    Ok here we go,my starboard engine was running hotter then normal now that the water temps and air temps are warming up here on long island.new exhaust both engines this year,new water pumps this year.talking to some friends and they have had great luck with barnacle buster.figured what the...
  8. J

    painting underwater metals

    anyone have any advice on what to paint my south bay strainers with.after last season they were completely covered in little white worms. I always had some on he struts and rudders but not crazy.last year when I hauled the strainers were completely covered.I was amazed there was water...
  9. J

    stuffing box packing

    Hello, I have an 88 30 foot weekender I removed all the packing from the stuffing boxes today. does anyone know what size is the packing. I have 1 1/4 inch shafts.I think it takes 1/4 inch packing Thanks
  10. J

    3 HP Yamaha

    For sale is 3 HP Yamaha.tag on side says manufacture date of 11/01.starts ands runs excellent.sold Inflatable last fall so have no use for engine.In Amity Harbor NY. $350.00.email for pictures or on craigslist long island with pictures.John 631-484-7960.johngus@hotmail.com
  11. J

    How did you make out???

    Just wondering how everyone made it through Sandy?I hope all are OK.Four Play faired the storm with only one torn zipper thanks to Delmarine in Amityville's skill in blocking her way up off the ground.
  12. J

    west marine dinghy 8.6 foot

    For sale used west marine 8.6 foot inflatable dinghy.has slat floor.has a few patches.in good condition.In Amity Harbor NY for pickup $250.00 631-484-7960 johngus@hotmail.com
  13. J

    one tab only going half down

    hello, i have a 1988 searay 30 weekender.my port tab is going all the way down and when retracted I can manually push it all the way down.My starboard tab will only go down about half and the pump runs but makes the sound like it is fully deployed.when retracted,I can only manually push the tab...
  14. J

    reuse zinc?

    just curious to see how many people replace the big zinxc on the transom every year.The one on the boat has 2 seasons on it and is still more then half.any reason why it needs to be changed every year?
  15. J

    Wanted Propellers for 30 Weekender

    Looking for 17x16 3 blade props,bronze or nimbral.1.25 shafts.
  16. J

    Prop for 1988 300 weekender

    Just pulled the props from my 300 weekender 1988 with 350's.The props are 16x16 on the port side and 17x16 on the starboard.The searay site lists the correct props as 17x16's both sides.My question is why would someone use different props on both sides.I am going to bring them to a prop shop and...
  17. J

    riser gaskets????

    I have 88 5.7 small blocks with full closed system.I replaced the exhaust on the port engine last summer.this week noticed a coolant smell when staring cold.removed the risers and the gaskets were crap.the store only had the osco gaskets last summer so thats what i bought.I just purchased the...
  18. J

    1988 30 weekender throttle

    I tried the search but no match.My port throttle drops back to idle when pushing forward.It has morse controls.it seems like a drag adjustment but I don't see anything to adjust on the mechanism.i removed the top stainless plate but there is nothing under there.anyone ever have this.I have seen...
  19. J

    anchorage marina slip,Lindenhurst NY

    Up for sale is my slip in the prestigious Anchorage Yacht club in Lindenhurst NY.Slip #G26.Listed as usable 10 feet 8inch beam.the marina has 24 security,pool,tennis court,discount fuel dock for members.This is a deeded property. Maintenance is about $350 every 3 months with taxes of about $400...
  20. J

    1988 weekender 30 fuel filter

    I have a 88 weekender 30.It has the twin small block inboards.Does anyone know what the fuel filter part # is by the fuel tank.It is a fram cartridge filter.I really don't want to open it up to get the cartridge # off it and then leave the system opened up while I go to the store.I know the...
Back
Top