Search results

Can't wait to tackle this job, lol! I see a lot of 4 letter words in my near future.

Yep on starboard side cushion and under front Berth. Thanks!!

Just the floor Not the hatch.

Alexandria Moulding 1/4 in. x 1 in. x 96 in. Metal Mira Lustre Plain Edging Moulding AT016-AM096C03 (homedepot.com)

Wow! Looks fabulous

It's a floating floor but I did use double sided flooring tape on the perimeter and on and around the hatches.

Morning! On the stairs, I purchased and used dark brown vinyl stair edging trim (Menards). https://www.menards.com/main/flooring-rugs/flooring-trims-edgings/m-d-building-products-reg-1-3-8-x-36-vinyl-stair-edging/29702/p-1444438743424-c-12603.htm?tid=-2189266415306511527&ipos=3 For the hatch...

Thanks so much. Will try to access

Can anyone provide how or where to access the ac air filters for the 2 ac units aboard?

Thank you. The filters were changed with the annual full engine servicing earlier this year. Will look into after cooler thanks again!

We purchased our 1996 450 Dancer last year in October. Over the winter we had engine maintenance performed, belts changed etc. Why does the port engine have dark smoke? The Boat runs fine and took it 300 miles thus far this year with no problems.

We purchased our 97 450 Searay last October and couldn’t wait to get rid of the carpet. Over the winter I installed LVT throughout the cabin. It was a labor of love and one that was totally worth it

I found a replacement with exact measurements. Hopefully it will slide right back in. But I am handy. I just ripped out all the carpet and laid LVF throuhout

Worked like a dream! Thanks so much.

Thanks for the tips. Hopefully I will be successful using your suggestions. Info is much appreciated.

Anyone know how to replace a microwave in a 1995 450 Sea Ray Dancer? I used a small prybar and cut the one screw I saw on the left side but the thing still won't budge. Any ideas would surely help. Thanks!