Search results

  1. Robert Serviss

    58 Sedan Bridge Official Thread

    The bed sits starboard to port so it would be bow or stern side of the bed. I added one on the stern side of the bed. I used the feed from the Bose system than was under the bed.
  2. Robert Serviss

    58 Sedan Bridge Official Thread

    Has anyone had to replace or overhauled the boarding ladder on the swim platform. I think this kit should work for our ladders. Let me know your thoughts. https://shopggschmitt.com/collections/ladders/products/l08e3105-blk
  3. Robert Serviss

    Fresh Water Tank Gauge Inop.

    Thank you so much
  4. Robert Serviss

    58 Sedan Bridge Official Thread

    I used these lights in my engine room and they seem to work fairly well and are bright. Lightronic RV Under-Cabinet LED... https://www.amazon.com/dp/B07FVTLS7M?ref=ppx_pop_mob_ap_share
  5. Robert Serviss

    Fresh Water Tank Gauge Inop.

    Jim I’m having the same issue on my 2006 58db do you still have any parts left a may I send it to you for repair. Thank you
  6. Robert Serviss

    58 Sedan Bridge Official Thread

    Curious generator on or off
  7. Robert Serviss

    58 Sedan Bridge Official Thread

    Great information exactly what I was looking for
  8. Robert Serviss

    58 Sedan Bridge Official Thread

    I usually keep my daily trips when I’m cruising to 200NM or less due to fuel constraints. What was the longest run you made with your 58 on a single fill up and how much fuel did you have in reserve when you filled up.
  9. Robert Serviss

    58 Sedan Bridge Official Thread

    Has anyone explored using a product like this. https://www.hullshield.net/?fbclid=IwAR1wzHf_H5Y_fgDf8iwu7FT1wTEccGoZvoahdU0HntmmapfaVEUq00aGdNM
  10. Robert Serviss

    58 Sedan Bridge Official Thread

    That’s what I’m hoping he is also going to add speed bumps he called them to the area that pitted.
  11. Robert Serviss

    58 Sedan Bridge Official Thread

    My pitch was just below 35 he’s increasing it to 35
  12. Robert Serviss

    58 Sedan Bridge Official Thread

    Do you know if your duck mate put any cup into his props? Right now, my props have no cup or camber he said.
  13. Robert Serviss

    58 Sedan Bridge Official Thread

    Thank you he just called and that’s what the plan is
  14. Robert Serviss

    58 Sedan Bridge Official Thread

    The prop guy was going to scan it to see if it has been changed over the years
  15. Robert Serviss

    58 Sedan Bridge Official Thread

    I just left the prop shop and I have the 28 inch props if anyone knows of a set of 30 inch props for sale please advise
  16. Robert Serviss

    58 Sedan Bridge Official Thread

    Im Prop guy confirmed today that the pitting was from cavitation.
  17. Robert Serviss

    58 Sedan Bridge Official Thread

    Very possible I was in a marina with a sailboat with a metal hull that had major electrical issues maybe had some stray current. When I left that marina my zincs lasted much longer.
  18. Robert Serviss

    58 Sedan Bridge Official Thread

    I just got my boat hauled to do a bottom job before I head south for the winter and I noticed my props had some pitting, which I was told was from cavitation has anyone else experienced this issue and determined what the root cause was.
Back
Top