Search results

I just don't use it. I have to get the boat out of the water Everytime I use it. So I flush it using muffs

Yup, need a starter. Got a link to recommend?

Hello all, I need a starter for my 2007 sundeck 270, 6.2L Mercruiser. Just wondering if anyone has suggestions for a brand or a website. Thank you!!!

Hello all, I just got a 2007 sundeck 270 and it just clicks. I tap on the starter and she cranks. I replaced the 90 amp fuse link, 50 amp CB and solenoid on top of the motor. So I'm almost positive I need a new starter. My question is, does anyone have a recommendation for a good starter or a...

Lazy daze, thank you. All good points. Your point on leaving throttled while winching by myself, I was wondering if people do that. Seems sketchy. I may look into swapping out the carpet with plastic slics, I wouldn't have to back into the water as far, then have a better angle on the trailer...

Thanks, I'm on the gulf in Florida, I'm thinking a lot of the ramps are steeper because of the tide. I used to go just above the fenders on my 18ft boat and it was super easy. I have to sink the fenders at least a foot on this one, so I can't use that as a guage, I have to find a spot on the...

Hello all,I just upgraded to a bigger boat and am having trouble loading it. Ive tried going in draper with the trailer and winching it all the way on, shallow and driving it on, but it just seems to be a much bigger pain then loading my 18 footer I just sold. The problem is this boat is...

Was not easy, just tedious. I did it myself. Mine has the chrome over rubber rub rail. So I did the whole back corner panel. Removed the screws for the chrome, then the screws for the rubber to expose the top and bottom fiberglass sections. Removed those screws holding those together, what were...

And there is no more water intrusion.

Yes, I'm sorry I wasn't able to get it back out to test for a little bit. The bilges work just fine.

Hey I finally got the boat out on the water this weekend. Due to all of the saltway flushing the engine compartment Everytime the boat went out, nearly all of the electrical connections were corroded badly. But the water was definitely coming in at the seam under the rub rail. The seam was...

Thank you all for your answers. I just got the boat and was always kept above water, I have to trailer it home and it's always in salt water. I think the safest option will be to just muff it.

It literally looks like a T connected to the engines cooling system. Probably a check valve in there somewhere. My thought on this and question for the round table, if you are bypassing your water pump in the lower unit, and running the engine, wouldn't that burn up the water pump down there?

The hose definitely connects to the engine. Does anyone know what it's called or have some documentation I could review on it. I can't seem to find anything online about it. Thanks again.

Hello all, I just bought a 2007 sundeck 270 and there is a port near the back seat that looks like a way to flush the engine. This boat primarily sees salt water and guessing it is an add-on. Anyone seen this and know what it is? How to use it? If I use it should I run the motor? The guy I...

http://www.clubsearay.com/index.php?threads/trying-to-track-down-a-leak-and-found-hull-and-deck-separation.83315/ Here is another thread showing a similar issue, one guy said it is kinda common on this year and size Sea Ray boat.

The way it was coming in, I'd like to say yes, this is the point of entry. That seem looks open for about 5 feet. The back sinks down alot when first taking off and a lot of water comes up. I will have to get it out of water and fix this seam. That may be a week or so. But I will let you know...

And here is a picture from the inside. Hard to tell, but you can see light over those pipes, that's the seam.

Here is the starboard side. You can see a little gap.

Here is the port side. Nicely sealed tight.