Search results

Good information - I noticed the connector melted on my harness with the same issue the author of this feed is having. I cannot find the replacement you mentioned - do you have a part number on this? Could you instead back the wires out of the harness, clean them and reinstall a new harness...

Following this thread, same thing happened to me this weekend. One of the connectors in the harness is melted. Did not need a scanner for that. Having trouble finding the fix. I have a relay kit on its way and my mechanic mentioned the replacement harness from Mercruiser. Following this for...

I did not use the Mercruiser IAC's - they were hard to get. I researched and found that the 2002 Ford Windstar 3.8l V6 uses the same IAC. Went to my local auto parts store and found a good brand and used it. Actually used it on the starboard engine first 3 weeks prior and got the same one for...

I recently replaced the IAC and oil pressure sensor (a week prior) on my port engine. After replacing the IAC, the engine idle was 200 RPM higher than the starboard. 800 port engine vs. 600 starboard engine. I ran the boat for 30 minutes and when reducing the throttle all the way down but...

Evening - I am having a high idle issue. I recently replaced my IAC on my 2006 Sea Ray Sundancer with 350's. The idle RPM is high on start compared to starboard engine. Port = 750 Starboard = 600. After running the boat and easing off the throttle but staying in gear the port rpm is 1000 and...