Hey Gary,
probably a costly upgrade but easily priced out , and a decent starting point. at least in terms of parts. marineMax (although I think they’re the absolute worst-ha) would probably be your first option for doing the work. Unless you have a searay-familiar service tech.
On...
Hmm, never gave thought to the canvas. I like that. Definitely filling that gap btw tower base and gunnel w silicone sealant.
Stay tuned, thanks for the suggestions, fellas.
Hi Smart people,
Overall design maybe or whatever you’d like to call it- rain water ends up running into my wet bar/grill.
I have attached a few pictures, with my chicken scratch. Red indicating current rain water flow. The blue is where I would like to channel some of the water, into the...
I uploaded exactly where, and which fuse is the forward bilge (not the pump in the shower box).
My assumption is these bunch of fuses are the “bilge” fuses, Plus something else that used the tiny 5amp. Anyway, hope it saves someone else the trouble I went through.
Thanks guys.
Further inspection, you're completely right, there are smooth sections every foot or two. On my shower sump box, tightened the clamp best I could and now only have a drip drip leak, which I am fine with as I have a secondary pump outside the box that cleans up all else. In the...
Would anyone know exactly where my forward bilge pump fuse may be? Exactly where in the rear bilge compartment? I cant seem to find anything close in line with the actual pump, or at the helm, and it should be 'easily' accessible for troubleshooting...
thanks.
Yes, all your bilge pumps must be accessible for troubleshoot/fix/replace.
pull back the matting and you should be able to either unscrew or just pick up paneling. float is probably jammed and not able to fall. good luck.
Just to update/conclude. Appreciate everyone’s help and input.
I mixed all the input into plan of action.
Epoxy putty, masking tape mold, under lip small piece of marine wood, and longer screw.
Came out much better than expected and my Kenyon sits in there like an an astronaut strapped in...
Calling all plumbing gurus
2017 350 slx OB
while inspecting my bilge system (frwd and aft) there seems to be a common problem of the discharge fitting/clamp leaking, right off the pump. In the aft, I have an attwood 1700 leaking either within the blue screw fitting, or where the thin...
Seriously, Bill. I wish this was the only example of shoddy work I am finding. Trying to knock out what I am able to before I lean on my warranty/MarineMax, during my offseason. (likely the culprit of some of the shoddy work in the first place.
Unfortunately, The grill cannot be shifted...
Need some advice.
2017 350 SLX
Regarding: The Kenyon
grill cavity ‘cut-out’
Had to pull the grill to work on some electric beneath. 4 screws, one in each corner and 1 screw hole appears fine to rescrew, so I need advice on the (3) others.
Hole 1 isn’t even a hole, they completely missed the...
coz- Thanks for the input. Not sure if that outfit is stringed into the gfci circuit or not. The Specific brown outlet itself doesn’t have the test/reset buttons but I would hope it’s on the circuit. I can’t test it because I can’t get the relay to keep the outlet hot So I can trip it manually...
Hi guys,
Looking for a bit of guidance.
2017 350 SLX OB.
My grill suddenly stopped working and some basic troubleshooting has led me to the continuous clicking of the 30A relay below my grill, behind the fridge. From what I can tell, the relay powers the brown outlet behind the trash...
Hello,
I have a 2017 350slx OB and the plastic adapter piece (which mates the Attwood mast night pole, to the motor) cracked and needs replacement.
the wire to the light, needs to be cut, or disconnected so I can remove the broken piece and feed the wire through the new piece. The only way to...
Hi,
Not sure how much newer stuff you stock but for a 2017 350slx:
-Looking for (1) blue led illuminated stainless steel cup holder with drain plug.
-repair parts for faucet in head. (Or replacement faucet) it’s an ITC.
Thank you.
Brand new member, here.
Selling my 2004 Scout, and have been eyeing up a 350 slx OB.
I was excited to stumble on this thread, but then seeing the 'threads' lifespan was only a month long, a year ago, ending with an unanswered question, i was disheartened.
Maybe a different thread became the...