Search results

Found the smaller size roller toward the windlass but have not been able to find on any web site the lower one. Measurements are: 3" wide, 4-3/4" diameter and a bore hole size of 3/4". Need both the roller and insert (stainless steel). Anyone know where to find? Thanks, Bill

Am needing to replace my screen door and removed the outer door with ease but the inner door won't clear an obstacle under it. Am able to pivot the door left and right but not high enough to clear the track and there is something under the door preventing me from removing. Has anyone removed...

Does anyone have a recommendation of a reputable hydraulic swim platform with pop-up chalks for a 2007 Sea Ray 44 Sedan Bridge that will hold either a jet ski or tender. Have used one firm out of FL before with a very poor experience.

Someone before me replaced the carpet with artificial wood flooring. In doing so, they replaced all of the floor hatches with thicker wood due to the fit. Does anyone know the original thickness of the hatches (without carpet) as I want to go back to the original based upon the poor...

Went to start the gen-set and when I flipped the switch in the salon, the solenoid switch light came on but then I went to turn on the next switch, the pre-heat /on, it did not light so I still tried to start and nothing...won't crank over. I went into the bilge and checked the circuit breaker...

Does anyone know where the module is for the systems monitor on a 2003 380 Sundancer? Sea Ray said in the engine room/bilge but am unable to locate. Thinking it could be in with the water heater behind the aft stateroom panel? Thanks,