Search results

Thank you. this is definately helpful information and I will try several diagnostic methods tomorrow. Yes, I replaced all new batteries recently. I was also advised to replace all 3 battery switches I reached out to the NautiMart support teach and they advised me to perform basic self...

hello i purchased the newer module for my 07 360 and still same issue :( initially the module "individual systems module" 425DRM which is located above batteries was out and had no power going out ( only had incoming power ). apparently module was replaced with newer plug / play $700+ part...

many thanks ! imichael@cox.net

will look into it and call them tomorrow. just nope that these isnt much rewiring needed.....

my email is imichael@cox.net thanks

i need a module for my 07 36 Sedan bridge.

those cushions are for cockpit , upstairs table top, to turn it into laying out bench. mine is missing that. would you like to sell that part?

Hello i bought a nice clean '07 36 Sedan Bridge model and trying to make it better for the season. was reading the helpful thread regarding touch pad above and want to share some issues im having. the touchpad seems to not function properly or i may have a short somewhere. one of the...

selling a complete rear enclosure canvas & covers off my 2007 Sedan Bridge 360 Tan / Beige color - sunbrela real stuff - purchased from Boatwains Locker and never used. I am now upgrading all my canvas to Black and no longer use this set. these are actual photos from yesterday. No Rips, No...

Hi, changed new fuel module and had my injectors on starboard motor redone with all acurate readings. fired up the boat and not it appears to smoke from exhaust on idle and certainly noticed a double fuel burn vs. port side motor. i took her out thinking it needed some old fuel burned, and...

looking for a replacement gauges for my 05 320 any suggestions? the top main gauges are in working order but glass and chrome rings seem to be weather worn a bit

Thank you for suggestions. will try the actuator guy you recommend above

Timing was off by about a /16th just a slight tap and it made all the diference. shes running amazing

Yay !!! this is the solution to my headache of 5+ days now thank God ! Thank you everyone for your help. after watching this video i made the last and only attempt left..... it did. boat runs like new and full throttle like a beast with 2xV8's im so glad that someone could point me...

Hello, so took the boat out earlier. same issue. swapping Complete Fuel module assembly didnt resolve the issue. I do have to say that it began to run better and prior to swap the new " crate motor " would top out at 3500 rpm - other motor ( starboard side ) keeps climing way past 4500rpm...

I have swapped both Fuel Modules earlier today and will do a sea trial in the morning to see if the issue transferred to the starboard side motor now. Im hoping that it is just the module. The shop that did all the engine work for me stated that he double checked the timing and distributor...

yes, wires and plugs are new. i will swap them with another motor just in case and test

Thanks for your response. the new crate motor came without it. original motor still ran but needed much TLC , valve job and was milky inside. was cheaper and better long term to replace with new. all new injectors were installed in the last 3 days, i swapped; ECU between motors to see if...

Hello just installed a port side new crate motor on my boat. boat starts and idles 100% smooth. during sea trial, As soon as i get the RPM to 1800+ it backfires and missfires ( only on port side *new motor*) changed plugs, checked timing, checked coil, checked ground, checked all BRAND NEW...

looking for Hatch Hydraulic actuator (1) for my 05 320