My preference is the dripless. Not cheap, but is more effective and keeps the bilge dry. When I had the props tuned/balanced had them replace all seals, bearings and dripless.
I own a 1997 400EC, had the props removed , inspected and balanced by Jonny's in Detroit last year, early spring prior to launch. Johnny's is highly recommended and have a good track record .The cost was $976, not including R&R.The report showed some minor deflection, but its was repairable. Not...
Replaced mine a few years back. You can get access to the valve and flex shower hose via an access panel on the starboard side in the cubby behind the rear cockpit bench. It's tough, but doable. I replaced it with an 8" flex stainless steel shower hose purchased on Amazon.
What did you replace the RayPilot 650 with? Im looking to replace mine, head unit and keep the pump and rudder angle transducer? Any problems with the upgrade?
I agree with Nick , all the way up at low speeds. The boat will get to plane on its own, depending on speed. So, I use tabs to get on plane quicker at lower speeds while inching upwards to the 2400 rpm area.Then when at plane, tabs all the way up and let the boat ride. I also use to raise the...
We love it. More room to gather, sitting on the platform with feet in the water. Also, has the integrated swim ladder, in the center, so when put away not in your way or exposed. It also, allowed for the davit /tender, barbecue and removable grab poles when coming up the ladder out of the water...
Here is an update,
Conatcted Airmar , the correct replacement transducer is ST800-INS Speed and Temp Insert. Purchased same from iMarine (iMarineUSA.com)
Has anyone replaced the speed/temp transducer for the tridata ray marine display. I have a 97 express, replaced the old i40 (no direct replacement ), so upgraded to the i50. All worked fine for two seasons, till this past weekend. Depth still functioning correctly, separate transducer , the...
Has anyone replaced the speed/temp transducer for the tridata ray marine display. I have a 97 express, replaced the old i40 (no direct replacement ), so upgraded to the i50. All worked fine for two seasons, till this past weekend. Depth still functioning correctly, separate transducer , the...
I used plastic hose purchased at best Marine, cut at 45 degrees at exit end. Works great and easy removed for hull waxing in the spring. Measure ID and purchase OD size to match
It is time to replace all 5 batteries. Looking for any information or learning experience from the group as it pertains to DP (dual purpose), DC (deep cycle) or SS (starting service). Im looking at replace existing batteries, Duracell with Deka. Would like to go from a 27 to a 31 wet flood cell...