Search results

  1. G

    HELP---rope caught in prop

    Call Richard at 678-469-5600 he will dive and take care of it.
  2. G

    Wanted Raymarine E120 5.69 software upgrade

    If I remember correctly I had to use a CF Card with very little memory maybe 128 or 512KB or it won't work. It was hard to find but after I got it all was OK.
  3. G

    Thanks for responding. You are correct it would take two remotes.

    Thanks for responding. You are correct it would take two remotes.
  4. G

    Need Calrion CMD5 Remote Control Splitter

    Looking for a Clarion CMD5 or CMD4 Radio remote control 6 pin Y-splitter cable connector(M101RYC-RET) used to add an additional remote. Been trying to find for months, if anyone has one that they would like to sell please let me know. Thanks
  5. G

    Do you have a Y-Connector (6 Pin) for hooking up the Clarion Remotes? In need of one can't fine...

    Do you have a Y-Connector (6 Pin) for hooking up the Clarion Remotes? In need of one can't fine it anywhere. Thanks David
  6. G

    Anyone use Fusion MS-BT100 bluetooth?

    Like it and recommended it to all my dock mates, no one has ever said anything negative about it. Located mine behind the Stereo down in the Cabin and works well anywhere on the boat. If at the dock and get off the boat with phone in my pocket it starts to cut out. If had the time and or was...
  7. G

    Hayward clorine feeder

    What you have is a Hayward CL200 or CL220 which use the same lid. A company called Dura Grip has made a wrench to take the top off. Google Hayward Chlorinator Lid / Cap Wrench and you will find one on for $15-$20.
  8. G

    390 - Diesel vs Gas

    A few years ago someone posted a comment that summed it up pretty good. "Never heard a Diesel Boat owner say they wished they had purchased a Gas Boat instead".
  9. G

    is it worth moving from a 340 to 380 or 400

    Not sure but I don't think Diesel Fuel is readily available on Lake Allatoona so your options are somewhat limited.
  10. G

    Moving up to a 48 DA helpful tips/what to look for

    I looked at many 2007-2010 before buying one and there are a few issues and things to look for. - Cabinets (high gloss) on the 2007 and 2008 delaminating, was told by multiple sources it is due to the humidity when it was applied. So some boats have it and some don't. Very expensive to fix. -...
  11. G

    Need Chicago Surveyor

    Looking to buy a 48' Sundancer in the Chicago area (boat is in Dolton, IL). Currently it is accessible in a well lighted heated storage facility with 50 amp power. The folks I spoke to in the Chicago area told me it is pretty common to Survey Boat in the heated facility then when the water is...
  12. G

    Looking for a freshwater 02-03 410 Sundancer...

    There are two on my dock on Lake Lanier that the guys have talked about selling.
  13. G

    Do you have a close up picture of how you mounted your grill.

    Do you have a close up picture of how you mounted your grill.
  14. G

    2007 Sundancer 440 for $299k

    Looked at the boat this weekend and it is as advertised. Had some fiberglass work done to it on the starboard side above the water line, poorly done and definetly needs to be repaired correctly if you want a nice boat. Sitting out without a cover and needs some serious cleaning. If your...
  15. G

    anyone know whats going on a MM at Allatoona?

    Heard today the location will be completely closed by Thanksgiving.
  16. G

    26 foot sundancer radar arch

    I have a factory stainless steel arch that I took of my 2005 340 Sundancer. It was attached to a Raymarine dome. Located in Atlanta ndcohen711@aol.com
Back
Top