Search results

I have twin merc 5.0 mpis on my 290. They have the large size raw water pump with the additional vertical tube that contains the air fittings. I had a leak just behind the pulley assuming in the shaft. So I replaced the ring as well as the seal. The new set is a compression fitting where as the...

It's an OE sensor but not Merc. Same exact one I used on the port engine and it worked perfect. I can try the Merc brand sensor though

I bought a 98 sundancer 290 recently with twin 5.0s with smart craft. It used to alarm every 2 Mins with sea pump ckt lo and show no pressure on port. I replaced the sensor, all is clear now and reads well. Starboard doesn't alarm, however it also read 0. So I replaced it as well. After I did...

I have a 98 Sea Ray 290 Dancer. When I bought it the windless does not work. When I hit the up and down, I hear a click and hear the motor, but nothing happens? Solenoid maybe? My second issue is in the process of trying to resolve the issue, I cant remember where the power goes on the main...

I have a 98 Sea Ray with Twin 2003 5.0 MPIs. One seems to run hot, but only the upper part. Smart View says both engines run fine around 170. However the upper risers and thermostat housing when shot with an infared gun say otherwise. After the engine is running just a minute, the thermostat...

I recently got a 1998 Sea Ray 290 Sundancer and I am in the process of changing all the lights to LED among other things. The inside is covered in Gold, knobs, switches. lights etc. My wife hates it and I don't blame her. I started to recently switch things to chrome/silver and I am in the...