Search results

Anyone know if there is a way to get to the FW tank without removing holding tank etc?

" At startup, the pressure is steady at about 30 psi. Engine sounds fine. After a few minutes, the pressure suddenly starts to flutter. Then it flutters down to zero over about 2 minutes and the engine dies." Had similar issues but didnt measure pressure. Was a loose connection on the low...

Had the same issue, but mine started tripping the breaker again after a while. It was the motor. Open the cover where the motor is a look for black oil around the "gearbox" I pulled the motor and tried rotate by hand. Could feel heavy restistance at 1 point during the rotation. New motor...

So, I found an indentical microwave in Sweden, 24 years old but was an easy solution. (So I thought) I swapped it but problem persists. Breaker trips on full effekt. So im thinking bad breaker... So I connect the "new" microwave in the kitchen outlet at the sink (runs on another breaker but is...

I got it to 9,6.. I have to measure again xD

I know, but none of the sellers ships to sweden. Im trying to contact them simontaneously to try convince them. https://www.amazon.com/dp/B08C1TDC2F/ref=cm_sw_r_cp_api_i_QQYWFYXR89ZV6GBVH3ZN?_encoding=UTF8&fbclid=IwAR2KNmYoHKRlU9VVNMKE4mE7LQMKnSS7ldl20qZoA5z5d9Jc977M3wzauDg&th=1 What do you...

I can and I did, but choises are few and I read I cant trust the measurments stated on Amazon, Some doesnt include the feet on the microwave. Also I cant return due to shipping costs and taxes. Therefore checking here first to aviod any mistakes

It seems I need a new microwave Anyone who can help me find a replacement? As I live in sweden I have to order from US for 110 v. Google doesnt treat me well, shows alot of 220v Amazon seems to be my only option? Current microwave in inches approx Height 9,64 Width 18,11 Depth 11,80 550 - 600...

I do already have a transformer shorepower incoming 220 to 110 V for the boat. So every thing runs fine, I do also beleive the transformer reduce the risk of galvanic korrosion from shorepower, but im not sure. Only problem I have to order everything abroad paying double what u r paying more...

That would be nice with a direct fit. Seems we dont have the same kitchen layout though. As I live in Sweden where everthing is 220 thing gets a bit more complicated xD Have to order from you guys (US) and no possiblity to return

o7 Everyone Anyone changed their microwave? Is it just plugged to a normal outlet? Ours keep popping the breaker every now and then? Any comments on that?

Found these in an earlier post. Anyone know where I can find them? Mb homebuilt? Anyone know any similar solution? I like the easy install, just 2 holes in the swimplatform.

Or maybe even a stern windlass

That would be 304.753.89

As I live in Sweden faucet is from Ikea, for outdoor kitchens. Matched perfectly Zink from general store in Sweden but can also be found abroad just spend enought time on google. Dropped in perfectly no cutting needed. Beleive it was 265 mm in diameter

Just sharing latest upgrade, no clean photo taken yet

Hello All I have this Crusair unit in my 99 290 SD. Model SX10-r6. I have never used it and previous owner tells me the system is discharged of refrigerant. I will have to get someone here in Sweden to service it. But these units are not common here. Can I find a manual somwhere? Also what...

I think i have what you are looking for in my basement just laying around. From a 1998 290 SD, White with gold trim? Worth mentioning here, I live in Sweden.. But to me its worthless..

I will post his picutres but was unforunately on the red side o the meter. I beleive it is worse on the sides where the tabs are mounted as it started dripping during sanding. But you may be right on the actual transom. Question is how bad is it? Cant really know until I tear it down I guess.

Sorry for late reply but many thanks! And it also seems you are right. Had real surveyor come by today. Scraped of antifouling and indeed we got other readings. Can post his report once I have it, maybe we learn something. Also had a sample of transom drilled out. It is wet according to the...