Search results

  1. R

    Strange drive tilt problem

    Have a 2000 Sundancer 290 with twin 5.0 Mercruisers and Bravo 2 drives. All of a sudden, my stbd drive will not raise using either the trim switch OR the trailer up switch. Did some electrical testing and the pump and both solenoids are fine....jumped the raise solenoid on that drive pump and...
  2. R

    Shifting Problem After Wide Open Throttle One Motor Only

    Hi All, Strange problem that just popped up this season......First a little back story. 2000 SeaRay 290 Sundancer, twin 350 Mercs with Bravo 2s. Both motors removed for the winter for rebuilding....everything is pretty much new....rebuilt both drives, new shift/throttle cables etc. etc...
  3. R

    2000 290 SunDancer Camper Canvas FIGHT

    Hi All, Bought a new to us 2000 290SD last year and spent most all of last season sorting out bugs here and there, mostly engine related. Now this season we should hopefully be able to enjoy it a little before we swap for something different next season :-) So, the boat came with a brand new...
  4. R

    Cushion Removal 290 Sundancer

    I have a 2000 290 Sundancer and I need to remove the vertical cushions for the port side chaise to have them redone this winter. I'm not sure how they come off, they appear to be attached quite securely so I am assuming the bolt through the fiberglass???? The back side of the fiberglass is...
  5. R

    Upgrading from RL70 Options

    Hi all, have a new to me 2000 290 Sundancer. It came with an older Raytheon RL70 chartplotter/Radar and enclosed array dome. There are no chart cards in the machine but everything else appears to be functioning. I was contemplating upgrading the system but I really don't want to put a ton of...
  6. R

    290 Sundancer Door Roller Repair

    Hi All, First time Sea Ray owner and new to the forum....thank you. So, I just bought a decent 2000 Sundancer 290 which needs a few little things to get ready to splash. The biggest issue is the sliding cabin door that is all sorts of broken. It appears as though there are NO roller trucks at...
Back
Top