Search results

  1. M

    MAN 1050 Diesel

    Anyone have any experience with 2002 MAN 1050 engines? Are the non CRM MANS something to stay away from? Also, I hear a lot about the maintenance costs, such as your 1,000 hour and 2,000 services. I use to work on a cummins QSC500 doing the general services (Oil changes, filter changes, engine...
  2. M

    4.3 Mercruisers won’t get boat to plane

    A buddy of mine just had new motor replacements(4.3L mercruisers) on his 35’ Monterey. Originally had a 2 barrel and then upgraded to the 4 barrel while doing the motor replacements. After getting it all set and on the first sea trial, the boat topped it at 4400 rpms but did not get the boat to...
  3. M

    Mercruiser not giving boat enough power

    A friend of mine just had two new inboard mercruiser motors installed into his boat. Off the top of my head i cant remember the exact size motor but they have the 4 barrel carburetor in them. It’s running on a 33 foot boat. When they went for the test drive the motors don’t seem to want to get...
  4. M

    2009 44 SeaRay sedan bridge Interior Hardwood flooring

    Hey guys, I had taken up my carpet in the salon of my 44 sedan bridge and was looking to possibly add hardwood flooring instead of having another carpet remade because the other one was junky. The only concerns I have with this is how to locate the same (factory) hardwoods already used so they...
  5. M

    Setting valves on a Cummins QSC 500

    Does anyone have a tutorial, instructions, or a video link to how to properly set the valves on a QSC 500? I believe every 500 hours they should be done. Just looking to get some more research and background knowledge on how it is done before I dive into it. Any tips and tricks are helpful too...
  6. M

    Servicing Cummins QSC 500 8.4 after cooler, heat exchange, oil+ fuel Cooler

    I’m going to be removing my heat exchangers to service them and would like to know if the cores come out the same way as they do on the aftercoolers? Also, how do you go about soaking the oil and fuel cooler in the solution? is there a core in that assembly as well, if so how do you remove it...
  7. M

    Tracvision M1 Out of Date?

    Over the summer I had called Direct Tv tiring to set up my Tracvision and Direct TV boxes. After not getting anything accomplished I was told by the rep that this Tracvision technology will be outdated very soon and it's not worth putting all the money into your system to fix it and that it will...
  8. M

    TracVision M1 Setup 44 sedan bridge

    I recently bought a 2007 44 sea ray sedan bridge and it was equipped with the Direct Tv and the Tracvision M1 Satellite dome. Everything was working well at the previous owner's dock. After bringing it home to our marina it didn't seem to work anymore. The previous owner was saying something...
  9. M

    GPS/Radar upgrade

    I have an older e120 Raymarine display and I'm looking to upgrade. Is there a compatible way of upgrading just the unit to a newer one instead of upgrading the radar and all other components. Maybe a new unit with some wire conversion harnesses?
  10. M

    Winterizing Water System 2007 44 SeaRay Sedan bridge

    My buddy was telling me about a black bladder relatively close to my water pump that helps with the water pressure in the boat. He said that i should drain the pressure and water out of it and that there should be like a bike tube spout coming out of it that allows u to release the pressure and...
  11. M

    Winterizing Cummins QSC 500

    Is it safe/recommended to flush fresh water through the engine (Salt Water) before you put antifreeze in them and put them away for the winter? Also what would be the best way of doing that?
  12. M

    Winterizing 2007 44 SeaRay Sedan Bridge

    Hey guys quick question I had. What do you all recommend is the best way to properly and completey winterize the boats A/C system and water system? I hear people blow out their water system, how does one go about doing that?
  13. M

    Winterization of Cummins QSC 500 8.3

    I recently bought my boat. I plan on winterizing the boat by myself this year instead of (Bust Out Another Thousand) (B.O.A.T). I have gotten all the part numbers for Fuel Filers, Oil Filters, and Racor filters. Quick questions regarding the type of engine oil and capacity it takes. I changed my...
  14. M

    2007 44 Sea ray sedan bridge radio compartment Glass replacement

    Any ideas of where i can get a replacement glass panel (8 3/8 x 13 5/8 Tinted) where the radio compartment is on my 2007 44 Searay sedan bridge
  15. M

    Running wires on a 44 sedan bridge

    Anyone have an idea how i can get a wire up to the bridge from my stereo head unit? Any easy/short routes to go?
  16. M

    Type of Bow Thruster?

    I recently purchased a 2007 44 sedan bridge this fall. I'm not sure exactly what type of bow thruster model I have. Was going to order the zincs online. Any ideas on how to tell what make and model you have?
  17. M

    Vetus Bow Thruster zinc location.

    I'm hauling my boat this weekend for zinc replacements on a 07 44 sedan bridge. Does anyone know what size, kind, and location of the anode the vestus bow thruster takes? Just want to make sure I put the right one on there. Also, would there be a problem if I add an anode that may be bigger or...
  18. M

    2007 44 Sea ray Sedan bridge cummins qsc 500 engine zincs question.

    I was replacing the engine pencil zincs on the heat exchange and aftercoolers and transmission coolers on my Cummins qsc 500 engine. I managed to remove and replace the transmission cooler on the starboard motor but on the port motor the transmission cooler is buried way in the back and it's...
  19. M

    2007 44 Sedan Bridge LED lights

    I have a 44 sedan bridge and the cockpit lights down low are led lights that are changeable from red, white, and blue, when you turn them off and back on they change their color. I searched online and wasn't able to find them anywhere. They are the small chrome circled ones. They came with the...
  20. M

    2007 44 Sea Ray Sedan Bridge Zinc Anodes size?

    Does anyone know what size zincs I need for my 44 sedan bridge? looking to replace all my zinc anodes on the hull. How many are there usually and where are they located? Also are there any on my bow thruster?
Back
Top