Search results

Where either at our dock, or we go to the island/other marinas or someplace, but usually I have a destination, and we always plug in a short power, on occasion will anchor out at the beach really not running much off the batteries .

So each bank would be 12 V but now I would have 1750 cranking amps/amps, which is more than sufficient to start the motor because the motor I checked with Mercruiser requires 800 cranking would I be correct?

I believe their in parallel

I have four batteries in the boat, the ones that are in there now are the dual purpose starting/steep cycle batteries group 27, I think the deep cycle batteries for as much as we start. The boat should work the batteries I have in there now are four year old And was recommended by The Marina to...

So there’s 31DC (deep cycle ) and 31DPDC ( dual purpose/deep cycle) I would like to change all our batteries Marina Battery question for my 05 360 DA, the owners manual says to use for 31 deep cycle batteries 31DC !!! Online I am reading that you should use dual purpose starting/deep cycle...

Marina Battery question for my 05 360 DA, the owners manual says to use for 31 deep cycle batteries 31DC !!! Online I am reading that you should use dual purpose starting/deep cycle batteries and not to use the deep cycles alone for starting your boat. What have you guys put in your boat? Will...

I have a factory vent gasket from a 06-390 , but here’s the measurements and see if their the same as yours

Here’s my work order and part numbers for the Novo kool

About your fridge freezer situation, I used the nova, cool fridge and freezer if you go to their website they will give you the replacement part numbers. This is the set up in my boat actual set up.

What size batteries do you have in your 360 I know the group 27 fit, but I was thinking putting group 29s or 31s the 31s are the biggest just wondering if they fit without a problem

This is the tailor-made part number CO197267. If interested , you can call them to confirm the part number I have a brand new vent window gasket direct from Taylor made I paid $238 for it I will sell it for 200+ the shipping to anybody that would be interested in this gasket please make sure...

Leaving the dock with a dirty boat is like ! Taking a crap and not wiping your self

I have an 05 360 Sundancer 8.1L HO with Acme props. Originally the boat came with four blade props and with all the specifications Acme recommended the three blade props 22x23 -varied pitch distribution and aft rake. my boat with full fuel five adults on board popped up on plane in six...

the 8.1,s and the 8.1Ho are virtually the same power output until you get to 3800 rpm , that’s when the extra horses kick in . 8.1L tops out at 46-4800 rpm The 8.1ho pulls 5000 rpm thus the top speed difference! My 06-40 DA with 8.1L burning 32GPH and cruised comfortably between 32-3600 rpm...

I replaced mine with NOVA COOL fridge and freezer . And their website they have the cross reference from your part numbers to theirs for direct replacements, these are my replacement https://www.novakool.com/product-specs-1...

I have this cushion,and the bow sun pad but do not have the cockpit sun pad cushions

Hi, I can login to the site on my iPad, but I cannot get on anything pertaining to Club Sea Ray on my iPhone. Any suggestions would be helpful. Thanks. Jim L

Hi ,just bought a 05-360. I’m looking for the cockpit sun pads or pad that completes the U shape cockpit seating. if you’re not using yours and willing to sell I’d be interested in purchasing it.

That’s what the mechanic said at the storage place I’m keeping the boat that there should be a plate, but my friend has a 02 360 and his does not have a plate. I was just wondering if anyone else had the problem , and I’m sure I can get it to work. I want to make sure. It doesn’t fly open when...

Thanks for the reply. Yes, we tried everything. I flipped the part around. I readjusted the whole latch so the power will extend farther. I adjusted it up and down. I flipped it upside down. Tried everything it’s just a hair short I did find a company that sells a 4 inch pawl , which I believe...