Search results

  1. Seapig

    310 DA salon fuse panel location ??

    I have a 2012 310DA. I had the cabin fridge out to replace the condenser fan and while stripping the insulation on the 12V wires to reconnect the fridge I shorted the wires together and thought I may have blown the fuse because it sparked and when testing with a test light, it looked like the...
  2. Seapig

    Incorrectly displayed system voltage

    On our 2012 310 (twin MAG 350 B-3) our starboard “battery voltage” is incorrectly shown on vessel view, gauge, and in scan data. I’ve verified the lower than actual voltage with a DVOM at the engine, alternator, and battery bank. It’s accurate when the engine is cold and shut off. Running, it’s...
  3. Seapig

    Cabinet hinge adjustment screw

    My 2012 310 Dancer is missing the adjustment screw from one of the hinges on the cabin fridge access door. I hate to order and buy an entire hinge from a SR dealer if these can be sourced elsewhere. Preciate any tips. Screw and hinge pics beLow
  4. Seapig

    Anode tooth washer placement.

    I’m curious about the proper placement of the tooth washers that are used on the anode retaining bolts for a Bravo III drive. under the bolt head or between the anode and the housing/piston? I’m refinishing my drives and pistons to repair some corrosion. The magnesium anodes still have plenty...
  5. Seapig

    Tab switch confusion

    This was my first year with our 2012 310 Dancer (twin Bravos). My former boat was a 2005 260 with a single Bravo. The older Dancer had 2 rocker switches for the tabs. For “bow down” the indication was to push the switch at the top or “up”. Our 310 has toggle switches with a boat icon and arrows...
  6. Seapig

    350 Mag crank-up time?

    I have 2012 Mercruiser Mag 350s with push-button start in our 310. Boat is new to us this season. No running issues and no engine codes. Both engines crank for about 4 seconds before coming to life, no matter if they've sat for days or a moment. Normal?
  7. Seapig

    310 Dancer

    New to us: 2012 fresh water 310 Dancer from Michigan City on Lake Michigan. She’s living on Lake Winnipesaukee in NH at Mountain View Yacht Club.
  8. Seapig

    VesselView & starboard voltmeter show incorrect voltage

    I have a 2012 SeaRay 310 Sundancer HID#SERT4123A212 that has twin Mercruiser Mag 350s with Bravo drives, Axius system, Vessel View & DTS. I'm bothered by a .5 to 1 V lower-than-actual voltage indication on the starboard voltmeter and on the Vessel View starboard indicator. I have confirmed with...
  9. Seapig

    310 gray water containment

    I've recently bought a 2012 Sundancer on Lake Michigan and will be moving her to Lake Winnipesaukee in NH come spring. I need to convert her sinks and shower to containment for Winnipesaukee. I did this myself on a 2005 260 at my home (trailerable) and it wasn't too huge a task. The 310 however...
Back
Top