Search results

  1. The Unicorn

    Official 280 Sundancer Thread

    I'll look into that option too...thanks!!
  2. The Unicorn

    Official 280 Sundancer Thread

    Great, thank you!! I did just look and found some nice units. I'm honestly not to good with these electronic jobs. But is it as easy as pulling out the old one and the new one hooks up to the existing wires?
  3. The Unicorn

    Official 280 Sundancer Thread

    So the VHF seems to be done. Does anyone know where I can get a vhf set up like we have already? The corded mic that plugs in the helm and the separate speaker?
  4. The Unicorn

    Official 280 Sundancer Thread

    Thanks Scott! I'm pretty sure thats not the issue. We've been out multiple times and the levels in both are still the same....I appreciate your response tho
  5. The Unicorn

    Official 280 Sundancer Thread

    Our stock VHF transmits but doesn't receive. Does anyone know something I should look for as the typical issue here? Or is this common being its 12yrs old and time to replace? Thanks!
  6. The Unicorn

    Official 280 Sundancer Thread

    Hello everyone, we got hung up on a sand bar recently, then the next day after some rain(we always get water in the bilge after it rains)it was an oily mess in there, both reservoirs for the drives were a little low. Do the drives somehow release fluid if they are bumped when getting hung up...
  7. The Unicorn

    Official 280 Sundancer Thread

    Hey Paul, Thanks for the input, much appreciated. Hopefully thats not going to be the case here. We were back out yesterday afternoon and strangely everything was working....thank god! I'm wondering if having the mooring cover off the past two weeks (which I never do, its always on) allowed that...
  8. The Unicorn

    Official 280 Sundancer Thread

    Then at the slip yesterday everything worked again. Later when underway for an overnight, same problem. Tried looking under the helm for a loose wire but didn't see anything
  9. The Unicorn

    Official 280 Sundancer Thread

    Hello everyone, hoping someone knows what the problem is here. When turning on the nav lights yesterday, all led display buttons on this one pad flickered and then none would light when pushed to engage that function. Nothing on this pad works except the nav lights, but now the nav lights won't...
  10. The Unicorn

    Official 280 Sundancer Thread

    Henry, a while back you and another guy on here helped me locate where to buy the bulb for my spot light. I feel bad I can't remember who the other guy was, but thanks so much to both of you!! Its been a crazy past few months and I finally uncovered the boat and put it in.....much appreciated!!
  11. The Unicorn

    Official 280 Sundancer Thread

    Does anyone know where to get a replacement bulb for the spotlight? Thanks!
  12. The Unicorn

    Official 280 Sundancer Thread

    Has anyone ever put an LED bulbs in the existing spot light? My bulb blew the other night and I need to replace it......rather replace with LED Thanks
  13. The Unicorn

    Official 280 Sundancer Thread

    I'm sure everyone has their own variations of whatever works best for them but for me with my cover that goes over the windshield.....I start on the port side two snaps up from the arch, then just continue snapping as I kneel up on the walk thru and reach as far as posdible over the helm(I dont...
  14. The Unicorn

    Official 280 Sundancer Thread

    Hi rahula, I'm not sure about AZ pricing but I paid $1,500 here in NJ. But my guy had to install snaps along the bottom of the windshield since there were none. Suns not nearly as strong here but the mooring cover was one of my first purchases since getting this boat in the fall. My cushions...
  15. The Unicorn

    Official 280 Sundancer Thread

    Does anyone know where to find the shower curtain for the head? I see tracks for one but no curtain. I tried searching online, but found nothing. Thanks in advance
  16. The Unicorn

    Official 280 Sundancer Thread

    TJ, Since the boats new to us I've never seen the faucet working properly. As soon as I pressurize the system the handle starts a very low pressure spray. I did check hot/cold valves and they are turned all the way back but figured the little on/off button on the handle should turn that off. So...
  17. The Unicorn

    Official 280 Sundancer Thread

    Thanks Woody, I'll be able to take a closer look Friday...much appreciated!
  18. The Unicorn

    Official 280 Sundancer Thread

    Thanks Bennett, I found the exact faucet but it appears that the slight drip/spray might be a valve issue before it even gets to the faulty handle. Now I'm curious if I should just replace the entire box/handle/valves etc?
  19. The Unicorn

    Official 280 Sundancer Thread

    Thanks Bennett, using the link you provided I do believe I found the gun to purchase as a separate item. I just need to get over to the boat for a closer look. BTW, thanks again for hooking me up with David who does the lettering. He had the exact Sundancer decals and we also had him do our boat...
  20. The Unicorn

    Official 280 Sundancer Thread

    Thanks Ferris, that's the one. But I believe I may have found just the gun on another search. I just haven't had time to get over to the boat to be sure
Back
Top