I had the same problem when I bought my boat.
It ended up being water leaking in from the Starboard porthole.
Replaced the gasket/screen and haven't had any water in there since
Any advice would be much appreciated.
I'm repowering this winter.
My question is has anyone removed their helm station/engine hatch floor?
I have 3116 Cats and it doesn't look like after removing the lift ram pins I can get the hatch open enough to get the engines with the transmission out.
I...
The port side has noticeable resistance when lifted and lowered. The starboard is like a wet noodle. No resistance and drops as soon as I let it go in the up position. The starboard side did have the vinyl/foam on the bolster replaced by the previous owner. Never thought the cushion may be...
Sling Lift Points Needed
My new to me 1999 330 Express has no stickers on the hull for marking the sling locations for lifting the boat.
The boat has 3116 Cat diesels.
I'm not sure if the boat was ever marked as my parts list doesn't show the stickers.
Does anyone know where the correct lifting...
I had the exact same problem with port 3116 when I bought my boat last year. All it took was to adjust the idle at the fuel pump. It is a straight forward process that someone with basic mechanical knowledge can handle.
There is a web site out there called Boat Diesel. I got the info to correct...
My last boat was a 330 Sundancer. I don't miss the seating in the cockpit one bit. The seats were always in the way. With the the new EC we can put large coolers and kayaks in the cockpit and still have room.
I need some help here.
My cabin entry door trucks are in need of replacement. The ball bearings on the wheels are coming out on the top rollers.
How do I remove the door to replace them? Or is there a way to replace the trucks without taking the door out?
Also, who is the supplier for the parts...
I am looking for a wiring diagram for my Cat 3116's. The engines are mechanically injected. Boat is a 1999 Sea Ray 330 Express Cruiser.
I recently had a major coolant leak (caused by a 1.20 gasket) and overheated the starboard engine which caused a crack in the exhaust manifold.
No alarm went...
Hello from Maryland
New to the board again. I sold my 1993 330 Sundancer a couple of years ago and have been boat less until a couple of months ago. I'm back in the game again with a 1999 330 Express Cruiser with Cat 3116's
Looking forward to the vast information available here.
Happy Boating!