Search results

Do you know if i replace the o2 sensor, do i still need someone to clear the code, or will it clear on it's own?

Thanks. Do you know if I can test an O2 sensor to see if it is working?

Thanks

2016 Sundancer 280 Mercruser 6.2L. I installed the Vessel View Mobile so I could figure out why my OBD Service Soon warning is showing on my smartcraft dash guages. The Mercury Vessel View Mobile is showing Fault Code 945-6 Catalyst oxygen storage capacity port. Is this an O2 sensor? Is there...

Are looking to have vinyl windows replaced, or a whole new enclosure? I would need the old panels to use a pattern, unless you are located in NJ (it looks like you are in OH?).

I am located in NJ. Sorry for the delay, I have not checked this website in a while.

Yes, still on LBI

No, but I would recommend Fred Fisher at Fisher Canvas. He made me a canvas winter cover, which is far superior to shrink wrap. This will be my fourth winter using the cover and it is still like new. I have friends who have gotten more than 10 winters of use from the Fisher covers.

I was able to edit the photos, so the file size could be uploaded.

I purchased a Sailrite walking foot machine and replaced my brittle and discolored vinyl. Better quality than the original from Great Lakes. I was actually trying to order from Great Lakes all summer, but they were so backed-up, they would not take my order. This project took me about 1 1/2 days...

Do you have the triangle shaped teak table that folds in half for the 2016 sundancer 280

I have water dripping from the end of a brass fitting that is attached to the bottom of the riser elbow on the starboard side.I can't find a schematic drawing or a part number. The brass fitting appears to be some sort of relief valve that threads into the side of the nipple that feeds water to...

I have water dripping from the end of a brass fitting that is attached to the bottom of the riser elbow on the starboard side.I can't find a schematic drawing or a part number. The brass fitting appears to be some sort of relief valve that threads into the side of the nipple that feeds water to...

I am a fairly new owner of a 2016 Sundancer 280. Does anyone have advice on the following projects I want to complete before I launch the boat in Spring 2019. I will be keeping the boat docked in the salt water of the NJ inter-coastal next summer. Bottom Paint: I have no idea which type of...

Are you asking if I am located in Brick, NJ. I purchased the boat in Brick, but the boat is no longer located in Brick.

Thanks for the advice. I spent couple hours today solving my problem. I started by buying a new pump (in case I needed it) and a set of caps to cap-off each water line on the cold and hot manifold so I could test which line might be leaking. I first checked the aerators, which did appear to be...

While all the faucets are turned off.

I am a new owner of a 2016 Sundancer 280. The fresh water pump keeps running every 10-15 seconds, it only stays on for a couple seconds. I traced all the water lines and don't notice any leaks. The water pressure is good on the wet bar sink in the cockpit, but pressure is only a trickle in the...