Search results

  1. C

    2008 310 DA Cabin door removal

    Finally got tired of this cabin door being hard to open. Thought I’d post these pics for the next guy. Remove side panel that covers the side speakers so you can get to caulking. Basically I took a razor knife and cut all the caulking on the left side panel that hides the door when open. Removed...
  2. C

    08 310 DA Cabin door removal

    My door is starting to shimmy and shake. Has anyone removed their door? Just looks like a nightmare.
  3. C

    Flushing AC

    Reading another thread here got me wondering about flushing the ac lines/pump. Is there a sop to do this? One guy runs shore water backwards thru system with strainer open. My boat is on a trailer right now so that might make it easier.
  4. C

    AC water intake

    Any valid reason to have a loop like this between the thru hull and the strainer on the AC? I know it holds water.
  5. C

    Phifertex screen fabric for bugs

    Anyone know if Phifertex screen material will keep out those little gnats? I know they make nylon netting for insect screens but not sure how durable it is.
  6. C

    Used prop condition

    Don’t know much about props. I bought these from Admiral C&B Propeller in Tampa. These are reconditioned. The lines you see look bad to me but they are very smooth, can’t feel them with your fingernail. Are these just imperfections in the finish? Anybody familiar with this company ?
  7. C

    310 DA drive gear, prop pitch

    Anyone know what the stock B3 gear ratio and prop pitch is on 2008 and older 310s? What would be the norm for cruising rpm’s vs wot rpm’s? I have a 2.0 on one side and 2.2 on the other both 22P props. About $3500 to have one regeared.
  8. C

    Looking for bravo 3 3 blade 20p prop set

    Pm me if you have a set
  9. C

    Changing upper gears on bravo 3

    Need to regear a 2.0 to a 2.2. My local shop is backed up til end of season. Considering doing it myself. Been through service manual step by step. Doesn’t seem too bad. Anyone else done it have any tips, cautions, etc?
  10. C

    Change prop or change drive gear ratio?

    Finally figured out why one engine runs slower than the other. Turns out the drives are geared different. 2.0 vs 2.2. The 2.0 runs 10% slower Can I change props to correct this or do I need to have drive regeared?
  11. C

    Leak down test kit

    Can anyone recommend a good leak down test kit for occasional use?
  12. C

    Fusion wb670 settings

    Can you get to all the stereo settings using the fusion link app on an iPhone or on an axiom? I really don’t want a separate remote. Also, does anyone know how well the Wi-Fi works if the unit is mounted in a cabin vs cockpit?
  13. C

    OEM cockpit cover for 2008 310DA for sale in classifieds

    Never been used. PM me if interested.
  14. C

    Original never used 2008 310DA cockpit cover

    OEM black cockpit cover for a 2008 310 sundancer. Never been used. In perfect condition. $700 plus shipping.
  15. C

    Polyform fender cover fabric

    Anyone know where to get the same or similar fabric used on polyform fender covers? Polyester yarn is all I know. I’d like to make some. Or any other suggestions. Not a fan of the boat blanket material at sailrite. thanks
  16. C

    Chain anchor rode weight

    Considering changing from rope to chain on my 310DA. Wondering if the added weight ( 1 lb per foot, so 130 pounds roughly) would help me get on plane faster when I have a boat load of ppl.
  17. C

    Cool fuel gen 3 filter brand

    Anyone using a brand other than Merc? I need the disc filter 35-892665 and they are $40 ea plus shipping and back ordered. Seems like a total price gouge. Several off brands for $10.
  18. C

    22 Miami Boat Show lodging

    Any tips or suggestions on where to stay? Never been to the area. Would love to get a boat ride in somehow.
  19. C

    Kohler gas genset hours

    I have a 5ecd. Curious how many hours these things normally last.
  20. C

    Exhaust manifold gasket leak

    Pretty sure I have a leaky gasket. I hear a snapping sound which varies with rpm. Is there any way to check for sure? How do you know which manifold?
Back
Top