After much consideration & effort of looking at replacing the existing lounge seat slide with heavy duty linear slides ($200-$300) and unable to find the replacement part I found an inexpensive solution. I removed the bent slide attached to the seat & a piece of 1/2” galvanized pipe slide into...
Don Sea Dek or a similar material looks good & prevents slips on the hatch door. I had mine done 2-3 months ago including the cockpit. I can send the templates if you want..
Boatman I would guess on a ‘98 your pump out hose has developed a crack or a hole or came loose at the deck or tank fittings. Even a very small pin hole in the hose won’t allow a vacuum when pumping out.
Hi Everyone,
New member here, '03 260 DA owner. I have a bent slide rail on the port side lounge seat. Previous owner must not have put the support leg down? Any advice on where to get the new slide or a better rebuilding solution? I've looked everywhere online with the original SR part # but no...