It could also be that the terminals need to be cleaned up. I had the same issue. Pulled the whole dash panel back and took off the wires, hit them with a wire brush and that fixed my issue. They looked just fine but the clean up helped.
Looking at a non Sea Ray and also a Sea Ray. Both with gas engines. Both boats are out of the water but want to have a compression check done along with oil samples on the engines and generator.
On is repo which is my biggest concern so looking for a good person/company to do this. Any help is...
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
There is a red button fuse for the windlass on the fuse panel in your engine compartment next to your batteries.
I don't find it being loud at all. Talking is not an issue when up and rolling. But I bet my "For Sale On This Website" 2001 410 EC is a hair quieter than the 2002. Well maybe not but worth throwing out there!
I was told I have OCD because I don't like sand on my boat nor wet feet past the cockpit area. It was almost like looking at a puzzled dog with their head cocked to the side looking at me. When I was asked what I did when the wife first got sand on my boat, told them I got up and cleaned it off...
Try Bahia Mar. Rooms are reasonable and right next to the marina. The beach is right across the street. Water Taxi picks up at the marina also. Was there last year and it was a great time.
Re: How old were you when you bought your first boat? The young are not buying boats
Been on the river since I was 3 month's old. The first that I purchased at 18 was a 1978 19ft Cobalt with a lot of teak in the interior. Sold that before having to mess with the teak! The first boat my dad...
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Just wanted to throw out there that my 2001 410 EC is listed on this site for sale. I would really appreciate if you could keep me in mind if any friends or fellow boaters are looking for
a nice one, I'm...
Contacted Al a few month's ago about getting a new compressor for my forward stateroom AC. Got right back with me
and got her ordered. Had great pricing and great to deal with. The factory delayed the unit a few times which was not a big
deal for me. Al even offered another 5% discount for this...
When I bought my 410, I removed the plow and replaced it with a Fortress. The only way it would work and sit nice was to remove the center guide roller. That allows the
shank to sit lower and keep the flukes from hitting the bow. The shank does rest on the stainless but has not caused an issue.
Wanted to throw it out in the threads again. Just had fresh bottom paint and wax 2 weeks ago and she's ready to roll.
I do have it listed here on the Club Sea Ray used boat section. http://www.clubsearay.com/boats/listing/276/41_Sea_Ray_410_EC_2001.html
Really appreciate anyone on board here...
I replaced the cooling unit in my DE461. Took about 1.5-2 hours start to finish. Make sure you take a few pictures of the back before
taking out all the screws. This will save some time when it comes time to put her back together. The most nerve racking thing was having to carefully
unfold the...
I sent back my 3 year old 1240i because the internal fan was making some noise but was still charging fine. Before sending it in, I filled out their online form
and also had a conversation with them. Got a call a week later and was told that my charger was out of warranty and that it was dead...