Search results

  1. xravenx

    2000 410 EC amp location

    Did a search and couldn't come up with anything. Trying to find where the amplifier for the stereo is located on a 2000 410 Expresss Cruiser. Could the lack of a subwoofer mean there is no amplifier? :huh: John
  2. xravenx

    Standard Horizon remote

    Selling a Standard Horizon remote that was on the Sea Ray Laguna I recently aquired. http://baltimore.craigslist.org/bpo/4910180140.html
  3. xravenx

    '88 Sea Ray 21 Laguna refreshing

    I have a little history with this boat.......my father bought this new in 1988 as a compliment to his 50' Chris Craft. I ran this boat for a few seasons around 92-93 when we were in between boats (making babies and wanting a bigger house). I lost track of the boat a few years after that and he...
  4. xravenx

    Fuel coming out of vent while refueling

    I'm posting this question for a friend of mine. He has a 2000 410EC with diesels. I watched him refuel yesterday and there was a constant dribble of fuel coming out of the vent. When the nozzle got ready to click off, it was WAY more then a dribble. Both sides do this and always have since he...
  5. xravenx

    Wet Sounds speakers

    Anybody have them, what do you think of them........some say they are better then JL. Need a subwoofer for the bowrider, may change out the speakers while I'm at it. John
  6. xravenx

    Sea Ray plaque

    Got this yesterday, my good friend Bill (hack4alivin) is displaying it
  7. xravenx

    300 DA hard to steer

    One of my employees has asked me to go for a ride with a buddy of his that has a late model 300 DA for some input about this boat. Iv'e never seen the boat or rode on it. My guy is not a boater and this is the best I could get from him: The captain is scared of the boat Very hard to steer...
  8. xravenx

    Converting Cruiseair 3 knob control to SMX II

    Already did a search. Has anybody done this conversion............thanks
  9. xravenx

    Had a dream last night & Gary was in it

    This first part is real - I removed a couple of my aluminum cockpit hatch frames to replace or paint them. I remember Gary had mentioned something in a thread about the correct hardware to remount the frames............I've done a search and can't find it. Now the dream part - I was on Gary's...
  10. xravenx

    Power source for 370 cockpit refrigerator

    I need to pull out my cockpit refrigerator to replace the broken trim piece (thanks Jason for the trim). While it is out I want to hook up the 12v power that I didn't do 6 years ago when I installed it (boat came with an ice maker). Does anybody know where the power source originates from on the...
  11. xravenx

    Repower time for the 370

    I knew this day was coming, I need to repower my 370, starboard motor has water in the oil and some of the cylinders. I pulled the plugs and was able to crank the motor over and water shot out of the cylinders. Sucked the oil out and removed the oil filter, there was alot of water in the oil and...
  12. xravenx

    Red Eye's Dock Bar

    Too bad, I'm going to miss that place as I will NEVER, EVER set foot in there again. Maryland area Ravens fans and steeler dislikers need to spread the word. Some pi$$ed off people on their facebook page. http://www.facebook.com/redeyesdockbar?ref=stream
  13. xravenx

    Idiots, jerks, drunks & morons

    The "THT bashing Sea Ray" thread got me thinking...............I read that whole thread on THT and in addition I visit other boating forums quite often. It seems like the only boaters who aren't idiots, jerks, drunks or morons are on boating forums. I see comments like...."I don't go out on...
  14. xravenx

    Battery charger replacement

    I need to replace my battery charger, it is the Pro Mariner 30 (3 bank) and is original to the boat. I have regualr wet cell batteries. Did a little bit of research already and my head is spinning, just wondering what some of you guys have recently installed and your opinions about your...
  15. xravenx

    Oil leak from top of dipstick tube

    In the past my port dipstick comes out of the dipstick tube about a half an inch or so after running the boat. This leaves a few drops of oil on the bilge floor between the motors, wipes right up. Yesterday I popped the day hatch and there was a puddle of oil between the motors, the port...
  16. xravenx

    Boating Magazine

    Came home from work a couple days ago and there was a Boating Magazine on the kitchen table. I asked my wife where it came from, she said fund raiser at school for our youngest son. I have not seen a Boating Magazine in years and couldn't help but notice how thin this one was. So, I looked at...
  17. xravenx

    7.4 electric choke

    I don't have 12 volts going to the electric chokes on both motors, doesn't matter if just the ignitions are turned on or the engines are running. I removed the "hot" wire from both electric chokes and provided 12 volts to them from another source, started the motors and they function properly...
  18. xravenx

    Had to pull the boat yesterday

    I noticed I had water in the bilge the other day, enough to make the bilge pump come on a few times in the couple hours I was on the boat. So yesterday I'm trying to figure out where it is coming from. There was a very small crack on the flat area between the motors and water was seeping up thru...
  19. xravenx

    Where have all the boats gone?

    I stopped down to check on the boat this week and I always take a lap around the grounds before I leave. I couldn't help but notice how many available storage spaces there was. At this marina all boats must be hauled for the winter and they have been. I've been winter storing there for about 12...
  20. xravenx

    Another fatal accident on Maryland waters

    It was not me..........I actually got a couple phone calls as the guy that caused this accident has close to the same name as me, I don't have a S in my last name. http://wjz.com/local/boat.crash.marley.2.1153305.html John
Back
Top