Yes heaps better, I have removed all of mine, fun job as stickers are now over 10 years old and some slow painful removal with a heat gun did the trick, used some cutting compound and come up a treat. The boat has got some lovely lines so i don't think it need anything to enhance it subtle curves
Ni
Nice work, that's on the list for myself. Already replaced the trim hydraulic system with stainless brackets which is a off the shelf option. Keen on getting that engine bay clean enough to eat off!!!
In heavy stormy rain weather do you get water make its way into the bilge? I get a small...
I have similar issues and have looked for some suggestions. My rope does tend to be on the stiff side and have read a apparent fix which is to soak rope in some fabric softener for at least 24hrs. I will end up replacing my rope and chain setup as I have just started diving off mine so require...
Thanks for the replies on my previous post. I would like to find spares for my windlass anchor. It’s a quick brand. I have uploaded photo. I can’t seem to see any serial numbers to identify the unit. Has anyone been down this road and have that info?
Thanks in advance
Thank you for your suggestions I'll certainly look at the Transom next time out of the water. I recently had out of the water for summer preparations and anti-fouled and re-prop speed the legs and props. I inspected the props and looked fine from my observations,
Cheers
Thank you for verifying what I suspected I appreciate.
Great Forum already extending my list of nice to do jobs with some of the modification which have been done.
Next task replacing all internal light bulbs with LED's which I discovered on previous post,
Cheers People!!!!!!
Hi, member for a while 1st time post.
I’m in Australia and the 290’s are renamed 325’s for some reason. Love the boat 1st cruiser I’ve owned and have been slowly bring back up to spec over last 3 years. My question is at low cruising speed with both engines around 1300 revs I get slight harmonic...