Search results

  1. Donetalkin

    Great Lakes Boat Tops

    Any sales going on now Ginger, I'd love to get some new canvas on the aft of my boat?
  2. Donetalkin

    OFFICIAL 350/370 DA Thread (2008 or newer)

    A little nudge, nobody has rooted around to reseal the anchor locker or clean out the clamshell drains etc.?
  3. Donetalkin

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Anyone know how to gain access to the Anchor locker other than the small access hole on top of the bow under the windlass cover? I've see some posts from others with different model searays that say the v-birth mirror comes off and behind it is an access panel. I need to investigate a leak...
  4. Donetalkin

    Water coming in to cabin

    I have a similar looking issue, did you find out where it was coming from? I'm going to start investigations at the anchor locker and go from there.
  5. Donetalkin

    Resealing the hull to deck joint

    I'm sure they are missing because the stainless is no longer fastened, it actually happened at a seam in the stainless.
  6. Donetalkin

    Resealing the hull to deck joint

    Anyone have tips for replacing screws where the head was worn off due to the boat rubbing a piling? Had some recent high winds and a stern line snapped which let my boat rub the pilling holding the dock. Fortunately, i don't have any fiberglass damage that i can see (boat is wrapped) but the...
  7. Donetalkin

    New site - report problems here

    Hmm, I'm using chrome and it's not working....it says i do not have permission to view that page or am not logged in. I'm definitely logged in, not sure what permission i need?
  8. Donetalkin

    New site - report problems here

    Any luck getting this link to work?
  9. Donetalkin

    Official 370 Sundancer thread

    I've got an 08' 350 Sundancer, my AC unit is aft, port and seemingly no easy access. It's nearing death due to the poor drain pan rusting from standing water. I want to replace it but I'm not sure the best way to get the old unit out without totally disassembling the wall between the aft cabin...
  10. Donetalkin

    340 dancer risers and manis

    Got my manifolds off, decided to start with the two in the center of the boat since they appeared to be the hardest to access (I can't walk between my motors when the Manifolds and Risers are on the motors) The starboard engine was fairly easy and came off without any unexpected issues. The Port...
  11. Donetalkin

    340 dancer risers and manis

    Well I should be good then, I'm 300 hours, only 100 ish in Saltwater the rest in fresh! Thanks for the feedback.
  12. Donetalkin

    340 dancer risers and manis

    I also have the 8.1's with SS Elbows. Mine are original to my knowledge, the boat is an 08'. Anyone have any info as to determine when they need replaced? They look fine to me, other than soot inside of course.
  13. Donetalkin

    System View (SC 5000) to Vessel View Upgrade Writeup

    Also, my local SR dealer got me information about connecting my generator (5.0ECD) to my vessel view (which I plan on doing). I will be able to view my generator information from the Vessel View. As a bonus, according to the Kohler documentation, I will be able to start and stop the generator...
  14. Donetalkin

    Replacing Impeller on seawater pump - 8.1s Mercruiser

    Any chance you can get your pictures fixed? This is a great write up, i'm about to attempt this but would love to see the pictures. Thanks
  15. Donetalkin

    Packing Stuffing box and Rudders

    I've got a 2008 350 Sundancer, anyone know what size Rudder packing I need?
Back
Top