I just got a quote to replace my bravo III lower unit + repainting the rest of the outdrive, and wanted to see if it is within a reasonable range. The props are fine.
Including tax and all the fees , the estimate is $10K. The lower unit is $4,800 but things add up so quickly. I am in Seattle.
Hi,
Can someone recommend a place to get the outdrive lube changed?
Mine is moored at Newport Yacht which is next to Seattle Boat but haven't used their service.
Let me know if you have any recommendation. I believe the boat has to come out for this service. Thank you.
-Cal
I do want to make a trip before the summer is over but am afraid of making the trip alone so I thought I would ask to see if there are any experienced boaters who might head to that direction. If not, I will just get to Langley instead to be safe :)
Hi
Since I don't see any reference material, I thought I would post the result and see how it compares to others in similar boats.
2008 280DA w/496DTS loaded with 5 people (800lbs), 20G water, 100G fuel.
Trim:1
30MPH @ 3350RPM/20GPH = 1.5MPG
Does that sound about right?
My boat has more than...
Where can I find specs for screws used in the boat? They are not listed in the part manual. I found that one of the screws to hold the metal insert in the rubrail came off and would like to replace it. Thank you.
I am thinking about having the first over night trip in Puget sound.
What would be a fun place for the whole family including 2 teen girls?
Do I need to call the place to book in advance? ( this Wednesday to Thursday)
I will be leaving from Lake Washington.
So far I am thinking:
Port Townsend...
Hi
After reading all the threads on CF, I decided to check on my module (2008 496) and realized it looked somewhat different than what I had see in the previous postings. It looks there is a plate between the module and the hose as shown in the first picture. Is this normal? I am not sure what...
Hi Seattle folks
I've never been on water on the 4th of July to watch fireworks. Will it be really crowded?
Given fireworks start pretty late and I am not someone who can navigate in dark, what are some good suggestions?
Thank you in advance!
I am new to the boating world but quite familiar with networking technologies in general. It is pretty fascinating to see how all different components are talking to each other although I wish they all talk in a common language. Based on what I read, Smartcraft has its own protocol and can talk...
The boat I bought (2008 280DA) came with a few accessories including SIMRAD NSS7 as well as Fusion audio system.
My basic understanding is all the information is carried thru NMEA network and each node should be able to pick up the data and display accordingly.
So the question is what do I need...
Good morning,
I was just wondering what my options are if I want to clean or work on my boat in the future on own. I don't need it right now but it just occurred to me that I can't even clean the boat if it is on the water all the time. I will rely on professional services most likely but what...
My 08 280DA has the PD2030 converter/charger and two G27 batteries. I believe each one is connected to its own output of the charger and can be combined when starting the engine (496) by selecting both. I plan to add one ore two more batteries and want to make sure I am doing this right. I've...
https://goo.gl/photos/4dRvQ2FnhWHj9wat7
I found this plate in the engine room of my 280DA. What is it? it looks like something else would be docked here.
Hello
I just purchased my first boat moored here in Lake Washington. I've taken it out a few times around the lake and would like to meet other family oriented boaters in this area. Thank you.