Search results

Thanks for the replies. I dont think I'm actually the one overthinking it, simrad and the company I am buying the mount from seem to be. They are the ones telling me it has to clear the bow but if your not having any issues I'm going with that :) I'm just going to buy the 12" mount I had...

I have a couple of questions about your radar. Is it 4g? Have you tried it yet? Do you see the bow of your boat on the screen? The reason I as is that on a 37 foot boat im guessing that the bow is in the 12 1/2 deg downward beam the radar produces at the height youve mounted it. I have a 39...

Im having issues installing a 4g dome on my 390ec. The radar has a 12 1/2 deg upward and downward beam angle off centerline of the dome. The instructions and advice from simrad and others is to mount the dome high enough that the nose of the boat is not hit by the beam. Since the nose is...

Im having issues installing a 4g dome on my 390ec. The radar has a 12 1/2 deg upward and downward beam angle off centerline of the dome. The instructions and advice from simrad and others is to mount the dome high enough that the nose of the boat is not hit by the beam. Since the nose is...

Yes, my boat is in the water and has been through all of this trouble. Thats the number one reason I have pretty much ruled out hull issues since I have periods of up to 2 weeks with no water. If you get a chance I'd like to see pics where you put these access holes before I go opening things...

Re: Been doing a bunch of electrical/electronics upgrades. Just did arch/cockpit ligh How bright are your guages at night? Im wondering if they are to bright given how nicely lit they are during the daytime.

Interesting, was there foam in the areas behind the batteries and generator or just water? What did you do after you drained the water? Did you leave the holes open or close them up and how. I dont think thats where this water is coming from but I will check it. My reasoning's for not...

While I'm trying to figure out my "new" water intrusion issue I thought I'd show everyone the work I'd done.

I appreciate the reply. I know the foam from the forward compartment is still slightly wet and I have something there to absorb the trickle of water coming from it(thats why i left the access holes so i could continue drying it) but this is a much greater volume of water and it had stopped for...

I'll check that later today and let you know what I find.

Ok, this will be my first post but I have been reading and learning from a few of you on your posts. Last year I found water coming from the fresh water tank and decided this spring to replace it. After reading a bunch on here I figured I would find liquid under the subfloor in the open cell...

Ok, this will be my first post but I have been reading and learning from a few of you on your posts. Last year I found water coming from the fresh water tank and decided this spring to replace it. After reading a bunch on here I figured I would find liquid under the subfloor in the open cell...