Search results

That is it - THANK YOU DAN.

Has anyone had to replace the windlass solenoid located in the bilge? My panel light will not go off leaving the windlass constantly in the on position. We previously replaced the windlass solenoid in the anchor hatch but this problem appears to be possibly a bad ground/fault in the bilge's...

https://www.go2marine.com/Bomar-Dog-Latch-for-Classic-Series-Portlight-S616? If they're still out of stock you can order them orders@pompanette.com Part #P100-005 @ $11.00 each.

https://nextdayboatparts.com/products/portlight-handle-quickdog-bomar-1107044?variant=33020931440749

I boat the boat in 2016 and the hull was all faded and marked up. It appears to have originally been a white hull that one of the two prior owners painted blue. They really didn't take good care of most anything. I had a lot of work to do on the boat and the quickest, cheapest and best looking...

Yes, I just completed their online application as I found their banner ad when I was making my post. Any idea how they compare price-wise to BOAT US GEICO?

I just received my renewal notice. WOW - they keep raising the annual premiums. I just switched from GEICO to Progressive for my auto insurance and saved almost 50%. Does anyone have any recommendations for obtaining lower-cost insurance premiums?

Thanks to everyone that replied. You all certainly provided me with an education and convinced me to wrap again. This time I changed my color to straight diamond white. Same wrap guy as the previous two times, I paid $2500 and the job looks amazing; a price you just cannot beat. For those that...

I've been wrapping it for the past 4 years. The wrapping starts to peel and wanted to consider painting as an option. That $30K is way too high for what I would consider.

I have an 2006 340 Sundancer. I'm considering having the hull completely painted. Does anyone with a similar model have experience in what I should anticipate in costs? Also, if you have a good referral in Southeast Florida to do the job would be helpful.

Last year my Windlass turned on by itself, ejected the line and burned the motor out. I replaced the motor and everything works fine EXCEPT; I cannot turn the anchor light (and as such the power) to the Windlass. My mechanic tracked it back today and believe it's the selenoid in the bilge...

OEM Sea Ray Electrical Switch Pad STBD Module Rv3 Searay1810626 https://ebay.us/SQMIm5 is $442.00. My vent switch will not trip open, only close. This appears to be an expensive replacement part. Any suggestions?

Does anyone have the water pump model information for replacement. My water pump will not engage after being idle for several months. I cannot locate in the Sea Ray 340 SUNDANCER 2006 Part Manual. Thanks....

Anyone has any suggestion on replacement of this interior trim that was damaged due to a water leak?

Any suggestions on painting the bilge? My boat has a fair amount of gel coat that's cracked off any makes the bilge look dirty and problematic.

Call me crazy I found the exact arms and wipers on Amazon; right under my nose.

Does anyone know the best replacement option is for 2006 340 Sundancer? I need replacement wiper arms and blade.

http://www.titan-marine-hardware.com/titanium-hose-clamps.htm

I recently had my mechanic replace what I thought were all of the hose clamps in the bilge. Come to find out he missed a bunch and consequently, I've had 4 break off underway with the associated hoses falling off and cause an overheat. I'm told that stainless steel hose clamps get salt water on...

Has anyone replaced the riser exhaust hoses? My mechanic quoted me $684 for each engine hose plus labor to install. This seems to be stupid expensive.