I can control and see my Fusion head unit via the Garmin 8616 but I do not see all of the detail on the Stations like you show here...
I have the same issue - I believe it has something to do with older Garmin GPSMAP products. I have a Garmin GPSMAP 8208 and a Garmin Echomap Plus 74 which is...
That looks nice! I purchased my 2004 340 DA in Aug of 2016 and it came with a 40" Samsung TV in that space and looks great. However - two things to think about. 1. Depending on what mount you use, the TV may get in the way of opening the power panel door. My TV is off center (pushed to the...
In a follow-up to a previous post last month - I'm adding Bennett Automatic Trim Tabs to my 2004 340 DA. I just spoke to Bennett today and they recommend that I connect the helm tab switches to a circuit that is powered by the ignition so that when I have my batteries on and not the engines, it...
Thanks Craig (love your name)! I've never really looked at the DC panel in the bilge before and my boat is shrink wrapped now. Sounds like it should be real easy then! Appreciate the quick reply! Craig
Upgrading Bennett Trim Tabs to AutoTrimPro... question on 20A(12V) power hookup.
So I decided that my 2020 upgrade to my 2004 340 Sundancer is going to be the Bennett AutoTrimPro (https://bennetttrimtabs.com/atp/). I purchased their AP000A1HA and ATPSENSTD (adds a sensor to existing hydraulic...
I have a 2004 Sea Ray 340 Sundancer that I've owned for about a year and a half. I just took the boat out for the first ride in 2018 and noticed that both my Auto Pilot and my SmartCraft no longer show the rudder position - which worked fine since I've owned the boat. I have a Raymarine Auto...
Indeed! It was bothering me that the TV wasn't centered on the bulkhead so I centered it only to learn I couldn't then open up the door to the power panel. The previous owner probably got the largest TV that would fit in the space without considering the door opening on the left side. But it...
Thanks. Based on your post and the one prior, seems like that is probably the most straight forward way to handle. The only scary part is where that hole happens to come through behind the dash (as you noted)! Perhaps, if I can get enough room behind the dash, I'll drill the hole from the...
Does anyone happen to know how the bulkhead in the cabin is held in place? I just purchased my 2004 340 DA in September and commissioned it today. I noticed today that the bulkhead isn't tight, dropping down a bit from the top left. I can push it up and back so if I'm underway, it's certainly...
Secure Bulkhead Wall?
Does anyone happen to know how the bulkhead in the cabin is held in place? I just purchased my 2004 340 DA in September and commissioned it today. I noticed today that the bulkhead isn't tight, dropping down a bit from the top left. I can push it up and back so if I'm...