Gelcoat peeling off... Not necessarily the fiberglass. My guess is due to age, heat, etc. I have that problem on anchor locker and engine room bilge. not on interior bilge.
Hello, your numbers are off but not by much. 2,600 RPM is 80% of the load which should be your normal cruising setting. The boat is under powered but as light as you were you should be doing 23-24 kts.... I get 22 kts at 2600 RPM with 90% tanks and full water plus the wife's provisions...
LOL ...OK point I was trying to make...it seems gauge lights are independent from all those switches you mentioned. Engines running=gauge lights on... I had the same question a few years ago and I finally realized they worked when The engines were running...... maybe I have an electrical...
This may sound silly, but I have to ask.... Are your engines running? or at least ignition on with start switches in "on" position? On mine this has to happen for the gauge lights to come on.
Silly question on my part.....are your engines running? or at least the ignition on with the engine switches in the "on" position? on my 390 the lights on the 4 analog gauges will not come on unless the above is true....
I have an 05 390. I don't know if its the same setup, but you have to remove the 4 screws from the inner tv panel with the tv in the retracted position. this will leave you with the back of the TV bracket. remove bracket screws an Voila!
I replaced mine with a Samsung 28" and fits perfectly.
Hello All. I am new to this forum. Just purchased a 2005 390DA a couple of weeks ago. Right now I am in the process of changing oils, impellers, filters, belts, etc. One problem I just started having is that when I turn on the fresh water pump water starts shooting out of the dock water...
Thanks for the info. I just got a 2005 390 and have the same problem. I believe it's pretty much the same boat. I will look for that "speaker". Mine is popping the circuit breaker as soon as I turn it on.