Is your ac/dc converter also off? If all is in off position that means only the bilge pumps both forward and aft (some older galvanic protection) and maybe CO2 sensors should work. Otherwise you may have a short or a mis-wiring condition.
I have clear silicone everything. I think I have eliminated all but one leak. The storage compartment under the mattress still collects a little water. The last spot to seal is the anchor locker. When they installed the drains I noticed they are ~ 1/2" above the very bottom so not all water will...
I am dealing with the same thing as to a leaky SeaRay. It seems they are very proned to leaks at the rub rail and any penetration through the top of the hull. I am clear siliconizing all of these potential leak areas top and bottom of rub rail, all windows, Cleats that penetrate the hull...
Looks like both are very good. What I liked about the ProMariner Prosport is its environmental protection.
ProSport is 100% waterproof and shockproof, weighing 40% lighter than older technology epoxy filled chargers providing cooler operation and greater reliability.
The Pronautic had...
Plenty on ebay. Works great!
https://www.ebay.com/itm/ProMariner-ProSport-Plus-20-Amp-3-Bank-HD-On-Board-12V-Boat-Battery-Charger/252331521444?epid=710119237&hash=item3ac02175a4:g:Sk0AAOSwwpdW9CUm
I just did this to my 06 AJ 290 and it works perfectly. I know can troll on either engine one at a time. If I have engine trouble on the STBD side (which is the default pump) I now have the port pump to give power steering. I don't understand why this is not a standard or at least an option for...