Hello to all, Had to post this before I forget. SO AIR.O'NAUTICAL sent me a link to MERCRUISERPART.COM I was looking for hoses for the boat 1993 found some ,others not available not in inventory oh no I sent a text to mercruiserparts.com saying needed help
( i know long winded ) but MARC from...
THANKS TO ALL FOR THE HELP AND INFO, yes she a hottie! thinking some hoses maybe collapsing a little don't know how old the hoses are ,temperature rises a little above 145 deg's not to bad but still need to replace them
I have a 1993 370 Sundancer twin 7.4 blue water engines, checking around I notices the hoses are soft ,have some numbers but can't seam to locate any one i the area who has them for sale?
if anyone can help Greatly appreciated
Thanks Pirate Lady and Stingrayaxe Good suggestion ,I'LL see if they have that soap around here and FWIW all info is good info .. Thanks... now got to go wash some canvas when it stops raining
Good Reading, I was under my Mooring cover today checking on engine hose part no# ,my arm was touching the cover and water was weeping through, so it needs to get clean and coated .you guy's use any type of special cleaner ? or just warm water and soap with a broom or pressure washer ?
Hello to all , I have a water leak n the bilge area as well I thought it was coming from the two strainer in the middle of both engines, I replaced the gaskets took the boat for a ride no water,i but paper towels down next day the towels were wet ,my boat sites out of water until we want to go...
Thanks S Lightly Salty for the reply. I was able to find my tracks but the rollers and blocks that I was told I need
have no clue where they go is my dilemma I need a drawing or someone who has done this replacement .
Reading your text there must be so many different types and styles of...
Hello to all ;I'm new here and was hoping someone here can help me.
I have a 1993 370 DA , cabin entry hatch tracks have to be replaced ,I bought them and was told i may need rollers and spacer blocks ???? there was none there when I took the unit apart
the sliding glass/plastic hatch as no...
Hello to all who reads this and to you CaptRonn , my name is Frank , I'm no stranger to tools
or doing any type of repairs , new to boat engines repairs, down in the bilge its tight i'm short, 68 and fat so i have to squeeze in to places. I have to replace both these pumps
(sea water and fuel...
Thanks! Frank that really helps i didn't want to go in half blind and screw things up, I'll be very careful pulling on the " muffs "
Thanks AGAIN Frank
newbie sea ray owner
http://www.carpediemyachtsales.com/yachtimage/bigger/MAI78H0V8ZBIPHS83BUTH1GERH56848K3MG0P4IMSyacht0718002.jpg
having a tough time uploading pics. This is a link to a similar helm.
Thanks
Good Morning to ALL, I'm new to this site and have read most of the FAQ pertaining to fixing replacing
helm-dash panel gauges, which by the way look very nicely done. although i haven't seen anything on what
to remove to get to the panel ( the order in which to take off first ) is there a video...