Search results

  1. W

    40 sedan bridge forum

    In my case, also a 2001, the elbow on the port side was cracked and leaking onto the batteries. Just like Mark, I couldn't source an exact replacement, so I ended up making a Frankenelbow from two different parts and then bedding the whole thing thoroughly. Has been dry for a couple of seasons...
  2. W

    Official Cummins 6cta 450C thread

    My problem turned out to be broken impeller parts on the intake side of the raw water pump. My mechanic said he's never found them there before. He checked with a couple of other local mechanics who also never had seen or heard of impeller pieces in the intake side of the pump. They were...
  3. W

    Official Cummins 6cta 450C thread

    I have the exact same condition on my port engine as Woody, except mine slowly runs up to 195-200F at 2200 rpm. Like he described, it cools down to just over 160F within a minute of dropping to non-planing speed. It will run all day at 1200 rpm and not move off 160F. So far, the raw water...
  4. W

    40 sedan bridge forum

    Thanks guys. I'll be working on these over the weekend.
  5. W

    40 sedan bridge forum

    Bought our 2001 400 Sedan Bridge last fall and began reading this thread from start to finish. We've done a number of upgrades during the winter months, and now I'm about to upgrade the sound system. Searching back through everything here I didn't find any information about removing the...
Back
Top