Thats what I have heard from a couple people. I just don't know what else this would be. It is sputter and popping when I am trying to start it, just like mine did when I had the IAC issue with my 200, but some people are saying that there is know way it is it because it died at higher rpm. I...
Won't let me bring up the link
04select200, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some...
So Monday I go down the boat, and it starts right up and runs. I put it on the trailer and take it home, all good right? When I get home I put on the muffs and try again, and it does the exact same thing. Sputters, pops and wont stay started. The boat would not start by advancing the throttle in...
I did try starting by advancing the throttle, and at first it would start, sputter, and then stall. After a while it wouldn't even do that, it would just crank. I am going down to the boat today to work on it and change the filter. I will let you know what I figure out.
Thanks for your help. Hopefully it is just a clogged up filter. Going to change it out Monday, and will let you guys know. Have you all really heard of a filter being so clogged that is caused the boat to not run??
Hi All,
Just purchased a 2008 SLX 270 496 Mag with 75 hours on it recently. Had it out for the first time yesterday and it ran good for about 3 hours, than it died. I was running it at about 3500 RPM and is started to miss, slowed down, and then finally just died. When I would try to start...
I was wondering if any one has ever installed these. They say then take #8 screws, but dont say how long they need to be. Any ideas? I was thinking 1/2 to 3/4. Also, what size hole do I need to predrill in the gellcoat for these #8 screws. Any suggestions for drilling into gellcoat, I have...
Had to cut my anchor this weekend because we spent 45 minutes trying to get it out without luck, moved every direction just no luck. I have a 2004 Select 200 with the anchor box in the bow. The anchor I had fit perfect in there, and I want the same set up. I found the anchor set this it is on...
The check valve goes in the water line between the fuel cooler and the thermostat. That is what is says in the instructions. I think I can figure out when I get to my boat later this week, I just want to make sure I have a good idea. I am a mechanic by no means, I can change water pumps, and...
Has anyone installed one of these? I have been experiencing vapor lock and tried idling and running blower, but I am still having issues.
I purchased the check valve today and it goes between the cool fuel cell and the thermostat. I have a 2004 5.0 MPI and I know the thermostat is on top...
It happened to me again 3 times this weekend. Each time I would the boat idle for a while and run blower in hopes that is would cool down. One time I had to go through a no wake that takes about 10 minutes.
I would start each time, but then would sputter and stall. It was really hard to get...