Search results

Happy holidays everyone, this past season I've been battling some warmer engine temps, also i am wondering about how much water flow i should have coming out of the exhaust, when I start the motors it takes 10 or more seconds until I get water out of the exhaust. Once pumping it is not a steady...

I am having an issue getting water discharge from the generator. I replaced the impeller this weekend the old one had 1 fin left. So i thought that was definitely the issue. Started the genny still no water. From here what are some other common or non common issues?

Have an 1985 390, this past weekend i went to hook shore power to the boat, as i am on the hard im close enough to the dock to run power. Line 1 kept tripping main breaker if i tried turning any of the breakers on. even when i hit the voltage test switch it would trip now i can close the main...

I have one key for the cabin door. Its a half moon shaped keep does anyone know where i can buy at least 1 more? Any help is much appreciated

Have a 1985 390, it has original sewage system. No holding tank or no way of getting pumped out. I want to remove this system and add a holding tank with the pump out fitting. What all is needed for this job. What pumps/macerator is needed? I dont completely understand this system as of yet. Any...

my dad has a 1982 360 ec, he has clicking sound on his starboard trans. my questions are for one, can you remove the unit without hauling boat? 2nd does this sound like a reduction issue or the trans itself? thanks for any help

Anyone encounter large amount of water in center bilge with the water tank? After i emptied the bilge today i began checking to see if this could have been rain water? Or am is it in need of a water tank? Anyone ever have a similar problem? Id greatly appreciate any help.

Does anyone on here know anybody that does custom fabrication of the engine room vent? Ive searched high and low and can not find anything close to the size i need. Thanks Adam

Does anyone know diameter of shaft packing on a 1982 360ec? Thanks

Good morning all, I am looking at a 1982 360. It has mercruiser 454 in the boat. It needs risers. And i have been looking for the correct ones for this year boat. The motors are 1982. I have a serial number if that helps in anyway. Thanks for any help. Adam

Im in the process of buying a 1989 340. A couple of things i would like to find out one is the current owner is claiming that there is a propeller seal that is leaking water into the engine room? When i saw the boat yesterday i did not see anything coming from the shaft packing. What other seal...