Search results

  1. Boz007

    06 290 Sundancer prop replacement

    The bottom is indeed in need of cleaning and paint. It's on the list for the end of the season. New cap and rotor, plugs and wires. Drives are all the way down. Tabs are not currently working (new pump but I need to pull the boat to replace the o-rings in the trim cylinders as they leak like a...
  2. Boz007

    06 290 Sundancer prop replacement

    So my boat has struggled to get on plane ever since we bought it a few months ago. I have twin 5.0s with Bravo 1 drives. I'm not concerned with top end and would just like more thrust out of the hole. Current props are 14.50 x 17 Vengeance RH and 14.50 x 17 Vengeance LH (according to sea ray's...
  3. Boz007

    Official 290 Sundancer Thread

    Thanks bud :thumbsup:
  4. Boz007

    Official 290 Sundancer Thread

    What's the recommended spark plug for the 5.0's?
  5. Boz007

    Has my pump died?

    Well looks like I need new o-rings. Is there a p/n for them?
  6. Boz007

    Has my pump died?

    Thats good info, thanks :thumbsup:. I'll be back out this weekend and will give that a shot.
  7. Boz007

    Has my pump died?

    Well I finally replaced the pump, super easy. Hit the button and the pump started pumping. Then I saw a nice bit of color in the water, so I guess that one or both of the cylinders are leaking :smt013 Yeehaw.
  8. Boz007

    Has my pump died?

    No noise, just the clicking. I'll try hot wiring and get back to you. Thanks
  9. Boz007

    Has my pump died?

    Trying to figure out why my tabs aren't moving and I think Ive narrowed it down. I had some work done recently and while they were in there they added fluid to the reservoir but it didn't help. They thought it could be the solenoids but Im not so sure because when I push the tab buttons on my...
  10. Boz007

    Dock Neighbor Doing Stupid Things This Weekend

    I read this yesterday thinking about how crazy that is and didn't even realize you're on Old Hickory. What marina?
  11. Boz007

    Official 290 Sundancer Thread

    Hmm, I thought I'd read that it was the seadek that stayed cool. There are a few others (like Nuteak maybe?) that do get hot. I will research a bit more. The impellers and water pumps were replaced before I took delivery. The survey found a number of things which we negotiated into the...
  12. Boz007

    Official 290 Sundancer Thread

    Excellent thanks! I was able to get that round cover off and get to the bulb. I knew it had to be easy.
  13. Boz007

    Official 290 Sundancer Thread

    So I have a couple questions, 1. Does anyone know what bulb to use in the galley overhead fixture? Theres no bulb and I can't seem to find any info. 2. I can't for the life of me figure out the fixtures in the mid cabin. I have a bulb out in there as well and can't get to the actual bulb...
  14. Boz007

    Official 290 Sundancer Thread

    Picked up my new to me '06 290 end of February and have been slowly getting it ready for the season. Previous owners neglected her a bit but a few parts and some time with a buffer and she's shining like new (almost).
Back
Top