I have a set of hytorq 23/27 13/4 shaft nibral props
light cup, brand new never been on a boat, purchased new 2010
I used them as a spare set on a 2003 46 searay with 480 hp cummins
3,000
call I wil send pics
586 747-3177
I have a set of 1997 7.4's I took out of a 370 ec send me a pm I will sell you a drop in replacement .......
Good running condition when removed in Sept.
John I have a pair of 7.4 MPI closed cooled motors great shape we repowered a 370 EC with 425's motors are complete drop in and go pm me if interested
Thanks Ron
Russ I had the same problem the first time taking the washer out I found that the hoses were tied down with no slack. I had to drill a 6 inch hole inside the aft cabin tv cabinet and cover with an inspection plate. You can then get in and cut a few ties which tie down the hoses. I ended up...
Russ you can remove the washer out the front by removing the couch in the aft cabin. You can get it out enough to get the top off without removing the couch. What is your issue??
Thanks Ron
Colinite paste is the answer it will give protection long after the 925 is gone check with the pro's it is their wax of choice, Imperial, finesse,and colinite paste, get paste off just after it hazes up do not let it dry.