Search results

sold

Selling our 2000 340DA with many upgrades. *Always freshwater *Always under covered slip *Less than 300 hrs on 7.4's *Less than 200 hrs on Generator *nautikflor flooring installed in the cabin *Interior Fabrics updated to new sea ray colors including bed bolster and all curtains *Exterior Seats...

Selling our 2000 340DA with many upgrades. *Always freshwater *Always under covered slip *Less than 300 hrs on 7.4's *Less than 200 hrs on Generator *nautikflor flooring installed in the cabin *Interior Fabrics updated to new sea ray colors including bed bolster and all curtains *Exterior Seats...

Its all a risk and anything on the dock is a easy target. Not sure how you all do it in other areas of the country but round here we build out the slip with fridges, tables, couches, tv's, fans, grills, counters with sinks, outdoor showers and....wall mounted vacuums. Most thefts are kids...

I have this mounted to a 2x6 with u-bolts around the dock support pole. 30' hose to reach the front of the boat and works like a champ. https://www.walmart.com/ip/Bissell-Garage-Pro-Wet-Dry-Car-and-Garage-Vacuum-18P03/14821899

Remove the panels in both closets, 2 screws in the crease, remove the panels above the port holes above the bed on both sides, screws in the crease. Use a push rod from stereo location pushing towards the bow to the closet, to the anchor rode compartment, across anchor rode compartment to small...

Considering it's happened 2 springs in a row I'm a little surprised there's not more related topics on the forum....my 340 can't be unique to this. Sent from my iPhone using Tapatalk

My filters recently replaced also. Last spring it was a panic moment. When it happened 2 weeks ago I shut off the generator opened the hatch and hung out for another 20 minutes and it started right up with no problems heading back to the dock. Has to be vapor lock... but I've heard it shouldn't...

Same thing happened to me once last yr and again 2 weeks ago, both times on a warm spring day running winter gas, anchored out with the genset running. Last spring both motors locked, 2 weeks ago starboard only. I was curious if anyone else had the same issue

its a long wood screw so I guess the difficulty depends on if a drill can be used.

If it's the same as my 2000 340 look closely behind the cushion, top side, for long wood screws. U may have to squeeze the fabric to see them. Also brackets on the ends, towards the aft, with screws. Sent from my iPhone using Tapatalk

Texoma is the best cruising lake in this area hands down. For those of us that want or need to be closer to the boat, lewisville is not bad. It has its perks...for instance, It's nice to stop on the way home from work and run to the pump out or get gas before the weekend. I can walk away on...

I boat on Lewisville and have most of my life. Its very busy on holiday weekends but it gets a bad rap, most weekends are typical for a metro area lake....gotta pick your spots. Ray Roberts is an option as well. Same size as Lewisville, in between Texoma and Lewisville. Its limited on places...

My numbers are identical to yours Creekwood, running at 28 mph GPS.

yes, tempered glass with magnetic latch.

Sailrite.com Sent from my iPhone using Tapatalk

carpet removed where table is, folded, glued and stapled back once the flooring is down. Bottom step and trim in front of shower is removed for install. We kept the carpet and re-glued at the small step from mid cabin to galley and directly in front of the mid cabin drawers where the slight rise...

And more pics... Sent from my iPhone using Tapatalk

Few more pics...the flooring is good stuff, have a couple of boo boos but overall I'm happy with it. Sent from my iPhone using Tapatalk